Maytag owners in Santaquin usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Santaquin
Within 30 miles of Santaquin there are 40 appliance repair companies in our data. The rest are spread across Orem (9), Provo (7), and American Fork (5). The farthest listed company is about 29 miles out. None of the repair companies near Santaquin name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Bill's Appliance Service, about 11.3 miles away. Rated companies nearby average 4.4 stars across 29 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention washer work | 4 |
|---|---|
| Appliance repair companies in range (30 mi) | 43 |
| Three nearest companies, miles away | 11.3, 12.9, 13.2 |
| Listing Saturday hours | 31 |
| Rated 4.5 stars or higher (10+ reviews) | 9 |
| Mention Maytag | 0 |
First up for Santaquin: Brothers Masters (24.3 miles away, based in Provo, 5.0 stars from 30 reviews, lists Saturday hours); Sears Appliance Repair (13.2 miles away, based in Spanish Fork, 4.3 stars from 52 reviews, lists Saturday hours); McCoy Fridge Repair (12.9 miles away, based in Spanish Fork, 4.9 stars from 209 reviews, lists Saturday hours); Bill's Appliance Service (11.3 miles away, based in Spanish Fork, 4.7 stars from 225 reviews).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Know Your Maytag Washer
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Common Maytag Washer Problems
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
Signs Your Maytag Washer Needs a Technician
- An error code on the display
- Musty or mildew smell from the drum or door seal
- Loud banging, shaking or walking during the spin
What a Washing Machine Technician Checks
Owner Care for Maytag Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Santaquin, UT
Most washer calls in Santaquin come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Santaquin
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Is your company licensed where my state requires it, and insured?
Maytag Washer Repair FAQs: Santaquin, UT
Should I repair or replace my Maytag washer?
Why is my washer leaking?
What should I do about a Maytag error code?
Other Washer Repair in Santaquin
Maytag Washer Repair Near Santaquin
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.