A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Springville UT
We found 40 appliance repair companies within 30 miles of Springville. 4 list an address in Springville, and the rest are spread across Orem (9), Provo (7), and American Fork (5). The farthest listed company is about 21 miles out. None of the repair companies near Springville name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Appliance Service And Technical Repair is the nearest, roughly 1.5 miles from Springville. Across 29 rated companies, the average public rating is 4.4 stars.
Companies are shown by relevance and distance from Springville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Maytag | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 11 |
| Open on Saturdays (per listing) | 42 |
| Repair companies inside 30 miles | 60 |
| Distance to the three closest (mi) | 1.5, 1.6, 1.6 |
| Name washers or washing machines in their listing | 4 |
First up for Springville: Brothers Masters (10.1 miles away, based in Provo, 5.0 stars from 30 reviews, lists Saturday hours); Sears Appliance Repair (3.0 miles away, based in Spanish Fork, 4.3 stars from 52 reviews, lists Saturday hours); McCoy Fridge Repair (5.1 miles away, based in Spanish Fork, 4.9 stars from 209 reviews, lists Saturday hours); Utah Appliance Rental (8.6 miles away, based in Orem, 4.9 stars from 51 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Common Maytag Washer Problems
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
- Musty or mildew smell from the drum or door seal
How a Washer Service Call Usually Goes in Springville
Owner Care for Maytag Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Around Springville
Most washer calls in Springville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Springville
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What guarantee do you give on parts and labor?
- What is the service call or diagnostic fee, and is it applied to the repair?
Maytag Washer Repair FAQs: Springville, UT
Why does my front-load washer smell?
Is my Maytag washer worth repairing?
What stops a washer from spinning?
Is this Maytag customer service?
Related Repair Pages for Springville
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.