If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Midway, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Midway
Our data shows 40 appliance repair companies inside a 30-mile radius of Midway. Other nearby bases include Sandy (9), Orem (8), and American Fork (5). The farthest listed company is about 21 miles out. No company within 90 miles of Midway mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Forever Appliance, about 3.2 miles away. Across 27 rated companies, the average public rating is 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 3.2, 3.3, 8.9 |
|---|---|
| Repair companies inside 30 miles | 60 |
| Mention Maytag | 0 |
| With 4.5+ stars and at least 10 reviews | 9 |
| Name washers or washing machines in their listing | 6 |
| Open on Saturdays (per listing) | 44 |
At the top of the Midway list: Brothers Masters (17.5 miles away, based in Provo, 5.0 stars from 30 reviews, lists Saturday hours); Sears Appliance Repair (20.9 miles away, based in Sandy, 4.3 stars from 134 reviews, lists Saturday hours); Refrigerate (18.7 miles away, based in Lindon, 4.0 stars from 297 reviews, lists Saturday hours); Forever Appliance (3.2 miles away, based in Heber City, 4.2 stars from 65 reviews).
Know Your Maytag Washer
How Maytag Washers Are Built
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Common Maytag Washer Problems
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
- Water left in the drum after the cycle
What Gets Fixed on a Midway Washer Call
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Midway, UT
Most washer calls in Midway come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Midway
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Midway, UT
Is my Maytag washer worth repairing?
How do I find a technician who knows Maytag washers?
Why does my front-load washer smell?
Why won't my washer spin?
More Washing Machine Repair in Midway, UT
Maytag Washer Repair Near Midway
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.