If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Heber, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Heber
40 repair companies serve Heber from within 30 miles. Other nearby bases include Orem (9), Provo (6), and Sandy (6). The farthest listed company is about 24 miles out. The closest is Heber Park City Appliance, about 0.9 miles away. No company within 90 miles of Heber mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.6 stars across 29 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 9 |
|---|---|
| Open on Saturdays (per listing) | 42 |
| Mention washer work | 6 |
| Mention Maytag | 0 |
| Appliance repair companies in range (30 mi) | 60 |
| Three nearest companies, miles away | 0.9, 1.2, 10.9 |
Closest matches for Heber: Brothers Masters (19.4 miles away, based in Provo, 5.0 stars from 30 reviews, lists Saturday hours); Heber Park City Appliance (0.9 miles away, based in Heber City, 4.6 stars from 534 reviews, lists Saturday hours); Forever Appliance (1.2 miles away, based in Heber City, 4.2 stars from 65 reviews); Refrigerate (21.4 miles away, based in Lindon, 4.0 stars from 297 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
Common Maytag Washer Problems
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Maytag Washer Problems Worth a Service Call
- Washer fills slowly, will not fill, or keeps filling
- Water left in the drum after the cycle
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
Around Heber
Most washer calls in Heber come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Heber Washer Technician
- Is your company licensed where my state requires it, and insured?
- Will you check the drain pump filter and drain hose before replacing the pump?
- Do you work on front-load and top-load washers, or only one type?
Maytag Washer Repair FAQs: Heber, UT
What should I do about a Maytag error code?
How do I find a technician who knows Maytag washers?
Where is the water under my washer coming from?
Other Washer Repair in Heber
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.