A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Taylor, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Taylor
40 repair companies serve Taylor from within 30 miles. 3 list an address in Taylor, and other nearby bases include Round Rock (14), Georgetown (9), and Pflugerville (7). Distances run up to about 19 miles. Santana's Appliance LLC is the nearest, roughly 0.5 miles from Taylor. None of the repair companies near Taylor name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.6 stars across 35 businesses.
Companies are shown by relevance and distance from Taylor. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 13 |
|---|---|
| Mention Maytag | 0 |
| With 4.5+ stars and at least 10 reviews | 25 |
| Repair companies inside 30 miles | 60 |
| Distance to the three closest (mi) | 0.5, 1.2, 4.8 |
| Listing Saturday hours | 44 |
First up for Taylor: Santana's Appliance LLC (0.5 miles away, 4.6 stars from 369 reviews); Appliance Express (15.7 miles away, based in Georgetown, 4.8 stars from 4,508 reviews); Mr. Appliance of Austin (11.2 miles away, based in Pflugerville, 4.7 stars from 1,377 reviews, lists Saturday hours); Sears Appliance Repair (1.2 miles away, 4.1 stars from 48 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
Maytag Washer Symptoms and First Checks
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
- Washer fills slowly, will not fill, or keeps filling
How a Washer Service Call Usually Goes in Taylor
Keeping a Maytag Washer Running
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Taylor
Most washer calls in Taylor come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Taylor Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
Maytag Washer Repair FAQs: Taylor, TX
What should I do about a Maytag error code?
Why is my washer leaking?
Is my Maytag washer worth repairing?
Related Repair Pages for Taylor
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Taylor technician bring the right parts.