Most Electrolux washer repairs in Taylor involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Electrolux Washers Near Taylor
Our data shows 40 appliance repair companies inside a 30-mile radius of Taylor. 3 list an address in Taylor, and the rest are spread across Round Rock (14), Georgetown (9), and Pflugerville (7). Distances run up to about 19 miles. None of the repair companies near Taylor name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Santana's Appliance LLC is the nearest, roughly 0.5 miles from Taylor. Rated companies nearby average 4.6 stars across 35 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 44 |
|---|---|
| Distance to the three closest (mi) | 0.5, 1.2, 4.8 |
| Mention Electrolux | 0 |
| Name washers or washing machines in their listing | 13 |
| Rated 4.5 stars or higher (10+ reviews) | 25 |
| Repair companies inside 30 miles | 60 |
The leading options for Taylor are Appliance Express (15.7 miles away, based in Georgetown, 4.8 stars from 4,508 reviews); Mr. Appliance of Austin (11.2 miles away, based in Pflugerville, 4.7 stars from 1,377 reviews, lists Saturday hours); Santana's Appliance LLC (0.5 miles away, 4.6 stars from 369 reviews); Munko Appliance Repair (18.2 miles away, based in Round Rock, 5.0 stars from 50 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines and Features
What a Electrolux Washer Technician Deals With
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
What Electrolux Says to Check First
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
Signs Your Electrolux Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Water on the floor under or in front of the washer
- Washer will not spin, or clothes come out soaking wet
How a Washer Service Call Usually Goes in Taylor
Keeping a Electrolux Washer Running
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Repair Cost Ranges
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
Laundry Notes for Taylor, TX
Most washer calls in Taylor come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Taylor Washer Technician
- What is the service call or diagnostic fee, and is it applied to the repair?
- How often do you repair Electrolux washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
Electrolux Washer Repair FAQs: Taylor, TX
Should I repair or replace my Electrolux washer?
Is this Electrolux customer service?
Why does my front-load washer smell?
More Washing Machine Repair in Taylor, TX
More Electrolux Washer Repair Pages Nearby
Electrolux Washer Repair for Towns Near Taylor
The technicians listed for Taylor also cover smaller towns nearby, including Rockdale. If you are in one of them, the companies above are your closest Electrolux washer repair options, and our helpline covers you too.
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Taylor technician bring the right parts.