A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Denton list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Denton TX
40 repair companies serve Denton from within 30 miles. 11 of them are based in Denton itself, and other nearby bases include Lewisville (6), Little Elm (4), and Frisco (4). The farthest listed company is about 17 miles out. None of the repair companies near Denton name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Texas True Appliance Repair is the nearest, roughly 0.3 miles from Denton. Rated companies nearby average 4.4 stars across 34 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 24 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 23 |
| Listing Saturday hours | 40 |
| Repair companies inside 30 miles | 60 |
| Distance to the three closest (mi) | 0.3, 0.5, 0.6 |
| Mention Electrolux | 0 |
Closest matches for Denton: J&J Appliance Service (1.0 miles away, 5.0 stars from 495 reviews); Got Your 6 Appliance Repair LLC (0.5 miles away, 5.0 stars from 367 reviews); Texas True Appliance Repair (0.3 miles away, 5.0 stars from 54 reviews, lists Saturday hours); Got your 6 appliance repair (8.8 miles away, based in Ponder, 5.0 stars from 513 reviews).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines and Features
What Makes Electrolux Washer Repairs Different
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
Electrolux Washer Symptoms and First Checks
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
When to Call for Electrolux Washer Repair
- An error code on the display
- Washer will not spin, or clothes come out soaking wet
- Water on the floor under or in front of the washer
Inside a Washer Repair Visit
Owner Care for Electrolux Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
Laundry Notes for Denton, TX
Most washer calls in Denton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Denton Washer Technician
- How often do you repair Electrolux washers, and how quickly can you get parts?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on front-load and top-load washers, or only one type?
Electrolux Washer Repair FAQs: Denton, TX
Where is the water under my washer coming from?
Why does my front-load washer smell?
What stops a washer from spinning?
Should I repair or replace my Electrolux washer?
Related Repair Pages for Denton
Electrolux Washer Repair in Nearby Cities
Electrolux Washer Repair for Towns Near Denton
Live outside Denton? The same Electrolux washer repair technicians serve Krum and Sanger. See each town's own washing machine repair listings below.
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.