Electrolux owners in Frisco usually want two things from a repair company: experience with the brand and quick access to parts. The Frisco list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Frisco TX
We found 40 appliance repair companies within 30 miles of Frisco. 14 list an address in Frisco, and the rest are spread across McKinney (8), Plano (6), and Little Elm (4). No company within 90 miles of Frisco mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Viking & Sub-Zero Service, around 0.6 miles out. The 34 rated companies in range average 4.8 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 19 |
|---|---|
| Three nearest companies, miles away | 0.6, 0.7, 1.1 |
| Listing Saturday hours | 47 |
| Rated 4.5 stars or higher (10+ reviews) | 29 |
| Companies within 30 miles | 60 |
| Mention Electrolux | 0 |
Closest matches for Frisco: Smartway Appliance Repair (7.7 miles away, based in McKinney, 4.9 stars from 1,145 reviews, lists Saturday hours); ThumbUp Pro Appliance Repair (6.5 miles away, based in McKinney, 4.9 stars from 247 reviews, lists Saturday hours); ALAS Appliance Repair (9.0 miles away, based in Plano, 4.8 stars from 276 reviews, lists Saturday hours); OEM & Appliance Repair (7.9 miles away, based in Lewisville, 4.9 stars from 168 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines and Features
How Electrolux Washers Are Built
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
What Electrolux Says to Check First
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
Electrolux Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
- An error code on the display
What Gets Fixed on a Frisco Washer Call
Owner Care for Electrolux Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Washer Repairs Cost
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Frisco, TX
City of Frisco (treated water purchased from North Texas Municipal Water District), which supplies Frisco, reports hardness of about 96-200 mg/L as CaCO3 depending on the supplying treatment plant (moderately hard to hard). Hard water leaves scale on washer inlet screens and heating parts and calls for the right detergent dose, which is worth mentioning when you book a repair. Source: City of Frisco Annual Water Quality Report
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Frisco
- How often do you repair Electrolux washers, and how quickly can you get parts?
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
Electrolux Washer Repair FAQs: Frisco, TX
Why is my washer leaking?
How do I get rid of a washer mildew smell?
Should I repair or replace my Electrolux washer?
Related Repair Pages for Frisco
Electrolux Washer Repair in Nearby Cities
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Frisco technician bring the right parts.