If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Southlake list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Southlake TX
Our data shows 40 appliance repair companies inside a 30-mile radius of Southlake. 4 of them are based in Southlake itself, and the rest are spread across Hurst (5), Keller (4), and Grapevine (4). The farthest listed company is about 10 miles out. Excellence Appliance Repair is the nearest, roughly 1.0 miles from Southlake. No company within 90 miles of Southlake mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 33 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Mention Electrolux | 0 |
| Open on Saturdays (per listing) | 45 |
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Name washers or washing machines in their listing | 21 |
| Distance to the three closest (mi) | 1.0, 1.4, 1.6 |
At the top of the Southlake list: Appliance Repair Now (1.6 miles away, 4.8 stars from 230 reviews); Ace Refrigeration and Appliance Repair (2.8 miles away, based in Keller, 4.9 stars from 1,857 reviews); Mr. Appliance of Hurst-Euless-Bedford (7.1 miles away, based in Bedford, 4.9 stars from 204 reviews, lists Saturday hours); Solution Appliance Repair (1.4 miles away, 5.0 stars from 62 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Know Your Electrolux Washer
How Electrolux Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
Common Electrolux Washer Problems
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
When to Call for Electrolux Washer Repair
- Musty or mildew smell from the drum or door seal
- An error code on the display
- Washer will not spin, or clothes come out soaking wet
What Gets Fixed on a Southlake Washer Call
Care Electrolux Recommends for Its Washers
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- Any error code shown on the display
Local Notes for Southlake
Most washer calls in Southlake come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Southlake
- How often do you repair Electrolux washers, and how quickly can you get parts?
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: Southlake, TX
Which Southlake technicians work on Electrolux?
Where is the water under my washer coming from?
What should I do about a Electrolux error code?
Is my Electrolux washer worth repairing?
Other Washer Repair in Southlake
Electrolux Washer Repair Near Southlake
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Southlake technician bring the right parts.