If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Grapevine, with those that mention Electrolux first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Independent Electrolux Washer Technicians, Grapevine TX
Our data shows 40 appliance repair companies inside a 30-mile radius of Grapevine. 4 of them are based in Grapevine itself, and the rest are spread across Irving (7), Lewisville (7), and Southlake (4). Distances run up to about 10 miles. None of the repair companies near Grapevine name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Appliance Fixx Air & Heat, around 0.2 miles out. Across 32 rated companies, the average public rating is 4.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Three nearest companies, miles away | 0.2, 0.3, 0.9 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 25 |
| Open on Saturdays (per listing) | 45 |
| Companies within 30 miles | 60 |
| Mention washer work | 21 |
| Mention Electrolux | 0 |
At the top of the Grapevine list: Appliance Repair Now (3.1 miles away, based in Southlake, 4.8 stars from 230 reviews); Mr. Appliance of Hurst-Euless-Bedford (7.7 miles away, based in Bedford, 4.9 stars from 204 reviews, lists Saturday hours); Ace Refrigeration and Appliance Repair (6.5 miles away, based in Keller, 4.9 stars from 1,857 reviews); AUG-GRIND APPLIANCE NERD (0.9 miles away, 4.9 stars from 38 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Electrolux Washer
What a Electrolux Washer Technician Deals With
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Says to Check First
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
Signs Your Electrolux Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Grapevine
Keeping a Electrolux Washer Running
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
- How old the washer is
Around Grapevine
Most washer calls in Grapevine come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Grapevine Washer Technician
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
Electrolux Washer Repair FAQs: Grapevine, TX
Why does my Electrolux washer show an error code?
How do I get rid of a washer mildew smell?
Do you work for Electrolux?
More Washing Machine Repair in Grapevine, TX
Electrolux Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.