A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Who Works on GE Washers Near Southlake
Within 30 miles of Southlake there are 40 appliance repair companies in our data. 4 of them are based in Southlake itself, and the rest are spread across Hurst (5), Keller (4), and Grapevine (4). No company within 90 miles of Southlake mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Excellence Appliance Repair, around 1.0 miles out. Across 33 rated companies, the average public rating is 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Repair companies inside 30 miles | 60 |
| Name washers or washing machines in their listing | 21 |
| Three nearest companies, miles away | 1.0, 1.4, 1.6 |
| Open on Saturdays (per listing) | 45 |
| With 4.5+ stars and at least 10 reviews | 24 |
Closest matches for Southlake: Ace Refrigeration and Appliance Repair (2.8 miles away, based in Keller, 4.9 stars from 1,857 reviews); ProStar Appliance LLC (8.2 miles away, based in Euless, 4.8 stars from 214 reviews, lists Saturday hours); Solution Appliance Repair (1.4 miles away, 5.0 stars from 62 reviews, lists Saturday hours); Appliance Repair Now (1.6 miles away, 4.8 stars from 230 reviews).
Know Your GE Washer
What Makes GE Washer Repairs Different
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
Common GE Washer Problems
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Washer fills slowly, will not fill, or keeps filling
- Loud banging, shaking or walking during the spin
What Gets Fixed on a Southlake Washer Call
Care GE Recommends for Its Washers
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Southlake, TX
Most washer calls in Southlake come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Southlake Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
GE Washer Repair FAQs: Southlake, TX
Why does my GE washer show an error code?
How do I get rid of a washer mildew smell?
Where is the water under my washer coming from?
Is this GE customer service?
Related Repair Pages for Southlake
GE Washer Repair Near Southlake
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Southlake technician bring the right parts.