A Amana washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Southlake, with those that mention Amana first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Amana Washer Repair Near Southlake
Within 30 miles of Southlake there are 40 appliance repair companies in our data. 4 of them are based in Southlake itself, and the rest are spread across Hurst (5), Keller (4), and Grapevine (4). The farthest listed company is about 10 miles out. None of the repair companies near Southlake name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Excellence Appliance Repair is the nearest, roughly 1.0 miles from Southlake. Rated companies nearby average 4.4 stars across 33 businesses.
Companies are shown by relevance and distance from Southlake. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Companies within 30 miles | 60 |
|---|---|
| Mention washer work | 21 |
| Mention Amana | 0 |
| Open on Saturdays (per listing) | 45 |
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Three nearest companies, miles away | 1.0, 1.4, 1.6 |
First up for Southlake: Ace Refrigeration and Appliance Repair (2.8 miles away, based in Keller, 4.9 stars from 1,857 reviews); Mr. Appliance of Hurst-Euless-Bedford (7.1 miles away, based in Bedford, 4.9 stars from 204 reviews, lists Saturday hours); ProStar Appliance LLC (8.2 miles away, based in Euless, 4.8 stars from 214 reviews, lists Saturday hours); Appliance Repair Now (1.6 miles away, 4.8 stars from 230 reviews).
Know which Amana washer you have before you call. Amana makes top-load agitator models, and the technician will ask.
Know Your Amana Washer
What a Amana Washer Technician Deals With
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Error Codes
| Code | What it means |
|---|---|
| lid | Top load: the lid is open, and if it stays open for more than 10 minutes the cycle resets and drains. Source: Amana - Error Codes in Top Load HE Washers |
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| LF / Lo FL / F8 E1 | Washer is filling too slowly or getting low water flow; check that the faucets are fully open and the hoses are clear. Source: Amana - Error Codes in Top Load HE Washers |
When to Call for Amana Washer Repair
- Musty or mildew smell from the drum or door seal
- An error code on the display
- Loud banging, shaking or walking during the spin
Inside a Washer Repair Visit
Care Amana Recommends for Its Washers
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
Amana Washer Repair Cost Ranges
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
Around Southlake
Most washer calls in Southlake come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Southlake
- If the washer is leaking, will you find where the water starts before quoting a part?
- How often do you repair Amana washers, and how quickly can you get parts?
- Can you give a written estimate before ordering parts?
Amana Washer Repair FAQs: Southlake, TX
Why does my Amana washer show an error code?
Why won't my washer spin?
Is my Amana washer worth repairing?
Do you work for Amana?
More Washing Machine Repair in Southlake, TX
Amana Washer Repair Near Southlake
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.