If your Kenmore washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Taylor, with those that mention Kenmore first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears washer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite washers; they are not Sears.
Who Works on Kenmore Washers Near Taylor
Within 30 miles of Taylor there are 40 appliance repair companies in our data. 3 list an address in Taylor, and the rest are spread across Round Rock (14), Georgetown (9), and Pflugerville (7). Distances run up to about 19 miles. Nearest on the list: Santana's Appliance LLC, around 0.5 miles out. None of the repair companies near Taylor name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 35 rated companies in range average 4.6 stars.
Companies are shown by relevance and distance from Taylor. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| With 4.5+ stars and at least 10 reviews | 25 |
|---|---|
| Name washers or washing machines in their listing | 13 |
| Open on Saturdays (per listing) | 44 |
| Mention Kenmore | 0 |
| Appliance repair companies in range (30 mi) | 60 |
| Three nearest companies, miles away | 0.5, 1.2, 4.8 |
First up for Taylor: Santana's Appliance LLC (0.5 miles away, 4.6 stars from 369 reviews); Mr. Appliance of Austin (11.2 miles away, based in Pflugerville, 4.7 stars from 1,377 reviews, lists Saturday hours); Appliance Express (15.7 miles away, based in Georgetown, 4.8 stars from 4,508 reviews); Munko Appliance Repair (18.2 miles away, based in Round Rock, 5.0 stars from 50 reviews, lists Saturday hours).
Kenmore Washer Lines Technicians Work On
What Makes Kenmore Washer Repairs Different
Select models include Deep Fill or water level control, which raises or lowers the fill level beyond the automatic setting. Source: Kenmore - Laundry Helper: Kenmore Washer Buying Guide
Signs Your Kenmore Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Musty or mildew smell from the drum or door seal
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Taylor Washer Call
Care Kenmore Recommends for Its Washers
- Use a level to confirm the washer sits evenly and adjust the feet if it does not. Source: Kenmore - Appliance Maintenance Tips to Help Maximize Efficiency
- Avoid packing in extra-large loads and follow the detergent maker's dosing for each load. Source: Kenmore - Tips for Washing Extra Large Loads of Laundry
Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.
Kenmore Washer Repair Cost Ranges
Price the repair before replacing a Kenmore washer. Published ranges for common jobs:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
What Taylor Owners Should Know
Most washer calls in Taylor come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Taylor
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- What is the service call or diagnostic fee, and is it applied to the repair?
Kenmore Washer Repair FAQs: Taylor, TX
Where is the water under my washer coming from?
Why won't my washer spin?
Do you work for Kenmore?
Other Washer Repair in Taylor
More Kenmore Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.