Most Maytag washer repairs in Yankton involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Yankton list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Who Works on Maytag Washers Near Yankton
Our data shows 17 appliance repair companies inside a 60-mile radius of Yankton. 2 of them are based in Yankton itself, and other nearby bases include Sioux Falls (10), Sioux City (3), and Wayne (1). None of the repair companies near Yankton name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Sears Appliance Repair, around 1.1 miles out. Rated companies nearby average 4.6 stars across 15 businesses. Because the nearest shops are farther out, ask each company whether Yankton is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 7 |
|---|---|
| Listing Saturday hours | 10 |
| Appliance repair companies in range (60 mi) | 17 |
| Mention Maytag | 0 |
| Mention washer work | 4 |
| Three nearest companies, miles away | 1.1, 1.2, 49.5 |
At the top of the Yankton list: Sears Appliance Repair (1.1 miles away, 4.3 stars from 13 reviews, lists Saturday hours); Midtek Appliance Repair (54.9 miles away, based in Sioux Falls, 4.8 stars from 589 reviews); Mr. Appliance of Sioux Falls (53.2 miles away, based in Sioux Falls, 4.8 stars from 668 reviews); H&H Appliance Repair (1.2 miles away, 5.0 stars from 16 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines and Features
How Maytag Washers Are Built
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
What Maytag Says to Check First
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
When to Call for Maytag Washer Repair
- Loud banging, shaking or walking during the spin
- An error code on the display
- Burning smell or a motor that hums without turning
What Gets Fixed on a Yankton Washer Call
Keeping a Maytag Washer Running
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
Around Yankton
Most washer calls in Yankton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
The South Dakota Plumbing Commission issues Appliance Contractor and Appliance Installer licenses as plumbing specialty licenses; official pages reviewed did not spell out which appliance work they cover or whether repair alone requires one. Source: South Dakota Plumbing Commission - Licensing
In South Dakota, you can check a license with the South Dakota Plumbing Commission lists of licensees (specialty licensees, including appliance) or report a problem to the South Dakota Attorney General, Division of Consumer Protection.
Before You Book in Yankton
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Yankton, SD
Is this Maytag customer service?
Why does my front-load washer smell?
Where is the water under my washer coming from?
Other Washer Repair in Yankton
Maytag Washer Repair Near Yankton
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.