Most GE washer repairs in Yankton involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Yankton, with those that mention GE first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
GE Washer Repair Near Yankton
Our data shows 17 appliance repair companies inside a 60-mile radius of Yankton. 2 list an address in Yankton, and the rest are spread across Sioux Falls (10), Sioux City (3), and Wayne (1). The farthest listed company is about 60 miles out. Nearest on the list: Sears Appliance Repair, around 1.1 miles out. No company within 90 miles of Yankton mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 15 rated companies in range average 4.6 stars. Yankton is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 4 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 7 |
| Mention GE | 0 |
| Repair companies inside 60 miles | 17 |
| Three nearest companies, miles away | 1.1, 1.2, 49.5 |
| Listing Saturday hours | 10 |
First up for Yankton: Sears Appliance Repair (1.1 miles away, 4.3 stars from 13 reviews, lists Saturday hours); Mr. Appliance of Sioux Falls (53.2 miles away, based in Sioux Falls, 4.8 stars from 668 reviews); Midtek Appliance Repair (54.9 miles away, based in Sioux Falls, 4.8 stars from 589 reviews); H&H Appliance Repair (1.2 miles away, 5.0 stars from 16 reviews, lists Saturday hours).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
Know Your GE Washer
What a GE Washer Technician Deals With
Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Symptoms and First Checks
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
GE Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Yankton
Keeping a GE Washer Running
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
What Yankton Owners Should Know
Most washer calls in Yankton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
The South Dakota Plumbing Commission issues Appliance Contractor and Appliance Installer licenses as plumbing specialty licenses; official pages reviewed did not spell out which appliance work they cover or whether repair alone requires one. Source: South Dakota Plumbing Commission - Licensing
In South Dakota, you can check a license with the South Dakota Plumbing Commission lists of licensees (specialty licensees, including appliance) or report a problem to the South Dakota Attorney General, Division of Consumer Protection.
Hiring a Washer Repair Company in Yankton
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on front-load and top-load washers, or only one type?
- Will you check the drain pump filter and drain hose before replacing the pump?
GE Washer Repair FAQs: Yankton, SD
Where is the water under my washer coming from?
Is this GE customer service?
Is my GE washer worth repairing?
Other Washer Repair in Yankton
GE Washer Repair in Nearby Cities
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Yankton technician bring the right parts.