Most Maytag washer repairs in South Sioux City involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The South Sioux City list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, South Sioux City NE
10 repair companies serve South Sioux City from within 60 miles. Other nearby bases include Sioux City (4), Yankton (2), and Le Mars (1). Distances run up to about 60 miles. None of the repair companies near South Sioux City name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Kollman Appliance, around 2.6 miles out. Rated companies nearby average 4.7 stars across 9 businesses. South Sioux City is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from South Sioux City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 4 |
|---|---|
| Mention Maytag | 0 |
| Name washers or washing machines in their listing | 2 |
| Open on Saturdays (per listing) | 5 |
| Repair companies inside 60 miles | 10 |
| Distance to the three closest (mi) | 2.6, 3.4, 4.0 |
First up for South Sioux City: Sears Appliance Repair (3.4 miles away, based in Sioux City, 4.7 stars from 119 reviews, lists Saturday hours); A&J Sales & Service (6.3 miles away, based in Sioux City, 4.1 stars from 474 reviews); J. Young Appliance (4.0 miles away, based in Sioux City, 5.0 stars from 23 reviews); Kollman Appliance (2.6 miles away, based in Sioux City, 4.2 stars from 43 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
When to Call for Maytag Washer Repair
- Burning smell or a motor that hums without turning
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
Inside a Washer Repair Visit
Owner Care for Maytag Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
- Any error code shown on the display
What South Sioux City Owners Should Know
Most washer calls in South Sioux City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Nebraska does not license appliance repair technicians at the state level; contractors working on other people's property register with the Department of Labor, and trade licenses such as plumbing are handled by cities and villages. Source: Nebraska Department of Labor: Who Needs to Register
In Nebraska, you can check a license with the Nebraska Department of Labor contractor registration (Search Registered Contractors and Subcontractors) or report a problem to the Nebraska Attorney General, Consumer Protection Division.
Before You Book in South Sioux City
- If the washer is leaking, will you find where the water starts before quoting a part?
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: South Sioux City, NE
Is this Maytag customer service?
Which South Sioux City technicians work on Maytag?
Why does my front-load washer smell?
What should I do about a Maytag error code?
Related Repair Pages for South Sioux City
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.