Maytag owners in Sergeant Bluff usually want two things from a repair company: experience with the brand and quick access to parts. The Sergeant Bluff list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Who Works on Maytag Washers Near Sergeant Bluff
7 repair companies serve Sergeant Bluff from within 60 miles. The rest are spread across Sioux City (4), Le Mars (1), and Wayne (1). The farthest listed company is about 55 miles out. Nearest on the list: Sears Appliance Repair, around 3.3 miles out. None of the repair companies near Sergeant Bluff name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 6 rated companies in range average 4.6 stars. Sergeant Bluff is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Sergeant Bluff. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Open on Saturdays (per listing) | 3 |
|---|---|
| Mention Maytag | 0 |
| Repair companies inside 60 miles | 7 |
| Distance to the three closest (mi) | 3.3, 7.8, 9.3 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Mention washer work | 1 |
At the top of the Sergeant Bluff list: Sears Appliance Repair (3.3 miles away, based in Sioux City, 4.7 stars from 119 reviews, lists Saturday hours); A&J Sales & Service (10.1 miles away, based in Sioux City, 4.1 stars from 474 reviews); J. Young Appliance (9.3 miles away, based in Sioux City, 5.0 stars from 23 reviews); Kollman Appliance (7.8 miles away, based in Sioux City, 4.2 stars from 43 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Know Your Maytag Washer
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
What Maytag Says to Check First
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- An error code on the display
- Water on the floor under or in front of the washer
- Washer fills slowly, will not fill, or keeps filling
What Gets Fixed on a Sergeant Bluff Washer Call
Care Maytag Recommends for Its Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Sergeant Bluff
Most washer calls in Sergeant Bluff come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
In Iowa, you can check a license with the Iowa DIAL Find a Record or License (Plumbing & Mechanical Systems Board public search) or report a problem to the Iowa Attorney General Consumer Protection Division.
Hiring a Washer Repair Company in Sergeant Bluff
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Sergeant Bluff, IA
Which Sergeant Bluff technicians work on Maytag?
What stops a washer from spinning?
How do I get rid of a washer mildew smell?
Other Washer Repair in Sergeant Bluff
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.