If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Craig, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Craig
Within 69 miles of Craig there are 6 appliance repair companies in our data. 1 of them are based in Craig itself, and the rest are spread across Steamboat Springs (3) and Rifle (2). Nearest on the list: Expert Appliance Repair, around 0.5 miles out. No company within 90 miles of Craig mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 3.2 stars across 6 businesses. Because the nearest shops are farther out, ask each company whether Craig is inside its regular service area.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Repair companies inside 69 miles | 6 |
|---|---|
| Name washers or washing machines in their listing | 1 |
| Open on Saturdays (per listing) | 3 |
| Mention Maytag | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 2 |
| Distance to the three closest (mi) | 0.5, 36.3, 37.3 |
First up for Craig: Expert Appliance Repair (0.5 miles away, 1.8 stars from 14 reviews, lists Saturday hours); Old Town Repair LLC (38.1 miles away, based in Steamboat Springs, 5.0 stars from 15 reviews); Appliance Service Center (37.3 miles away, based in Steamboat Springs, 5.0 stars from 3 reviews); Sears Appliance Repair (68.2 miles away, based in Rifle, 1.0 stars from 1 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Maytag Washer Symptoms and First Checks
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Burning smell or a motor that hums without turning
- Musty or mildew smell from the drum or door seal
- Water left in the drum after the cycle
How a Washer Service Call Usually Goes in Craig
Keeping a Maytag Washer Running
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
What Craig Owners Should Know
Most washer calls in Craig come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
How to Choose a Washing Machine Technician Near Craig
- What guarantee do you give on parts and labor?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Craig, CO
How do I get rid of a washer mildew smell?
Why is my washer leaking?
Do you work for Maytag?
Other Washer Repair in Craig
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.