Most Whirlpool washer repairs in Craig involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Who Works on Whirlpool Washers Near Craig
We found 6 appliance repair companies within 69 miles of Craig. 1 of them are based in Craig itself, and the rest are spread across Steamboat Springs (3) and Rifle (2). Expert Appliance Repair is the nearest, roughly 0.5 miles from Craig. None of the repair companies near Craig name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 6 rated companies, the average public rating is 3.2 stars. Because the nearest shops are farther out, ask each company whether Craig is inside its regular service area.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Three nearest companies, miles away | 0.5, 36.3, 37.3 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 2 |
| Listing Saturday hours | 3 |
| Mention washer work | 1 |
| Mention Whirlpool | 0 |
| Repair companies inside 69 miles | 6 |
Closest matches for Craig: Expert Appliance Repair (0.5 miles away, 1.8 stars from 14 reviews, lists Saturday hours); Old Town Repair LLC (38.1 miles away, based in Steamboat Springs, 5.0 stars from 15 reviews); Appliance Service Center (37.3 miles away, based in Steamboat Springs, 5.0 stars from 3 reviews); Alpine Appliance & Refrigeration (36.3 miles away, based in Steamboat Springs, 1.7 stars from 3 reviews).
Know which Whirlpool washer you have before you call. Whirlpool makes top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial models, and the technician will ask.
Whirlpool Washer Lines and Features
What Makes Whirlpool Washer Repairs Different
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Whirlpool Washer Symptoms and First Checks
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- An error code on the display
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Craig
Owner Care for Whirlpool Washers
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Craig
Most washer calls in Craig come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Craig
- Do you work on front-load and top-load washers, or only one type?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Whirlpool Washer Repair FAQs: Craig, CO
How do I get rid of a washer mildew smell?
Why won't my washer spin?
Why does my Whirlpool washer show an error code?
Which Craig technicians work on Whirlpool?
Related Repair Pages for Craig
Whirlpool Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.