Serving Craig, Colorado and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Craig, CO

See which appliance repair companies around Craig work on washing machines, how far away they are and how customers rate them.

Talk to a washing machine tech near Craig
Tell us the brand and the problem and we will connect you with a technician near Craig.
☎(866) 293-4411
✓6 companies listed for Craig✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Who Repairs Washers Near Craig

Our data shows 6 appliance repair companies inside a 69-mile radius of Craig. 1 of them are based in Craig itself, and other nearby bases include Steamboat Springs (3) and Rifle (2). The farthest listed company is about 68 miles out. 1 of them mentions washing machine or washer work in their listing or website. Expert Appliance Repair is the nearest, roughly 0.5 miles from Craig. The 6 rated companies in range average 3.2 stars. Because the nearest shops are farther out, ask each company whether Craig is inside its regular service area.

Washer & Dryer Repair
Sears Appliance Repair
1733 Railroad Ave Ste A, Rifle, CO 81650
68.2 mi from Craig
★ 1.0 (1 review)
Mentions washersSaturday hours
Appliance Repair
Expert Appliance Repair
395 School St, Craig, CO 81625
0.5 mi from Craig
★★ 1.8 (14 reviews)
Saturday hours
Appliance Repair
Old Town Repair LLC
815 Pahwintah St, Steamboat Springs, CO 80487
38.1 mi from Craig
★★★★★ 5.0 (15 reviews)
Appliance Repair
Appliance Service Center
1319 Manitou Ave #4932, Steamboat Springs, CO 80487
37.3 mi from Craig
★★★★★ 5.0 (3 reviews)
Appliance Repair
Alpine Appliance & Refrigeration
2567 Riverside Dr, Steamboat Springs, CO 80487
36.3 mi from Craig
★½ 1.7 (3 reviews)
Appliance Repair
Nordic Refrigeration
140 E 26th St, Rifle, CO 81650
67.7 mi from Craig
★★★★★ 4.8 (18 reviews)
CommercialSaturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Craig
Mention washer work1
Distance to the three closest (mi)0.5, 36.3, 37.3
Rated 4.5 stars or higher (10+ reviews)2
Mention a major washer brand0
Repair companies inside 69 miles6
Listing Saturday hours3

Closest matches for Craig: Sears Appliance Repair (68.2 miles away, based in Rifle, 1.0 stars from 1 reviews, lists Saturday hours); Expert Appliance Repair (0.5 miles away, 1.8 stars from 14 reviews, lists Saturday hours); Old Town Repair LLC (38.1 miles away, based in Steamboat Springs, 5.0 stars from 15 reviews); Appliance Service Center (37.3 miles away, based in Steamboat Springs, 5.0 stars from 3 reviews).

⚡ Get connected with a washer technician near Craig
☎(866) 293-4411

When to Call for Washer Repair

  • Washer fills slowly, will not fill, or keeps filling
  • Burning smell or a motor that hums without turning
  • Water on the floor under or in front of the washer
  • Loud banging, shaking or walking during the spin

What Usually Goes Wrong

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

What Gets Fixed on a Craig Washer Call

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.

Troubleshooting first? Start with front-load vs top-load washer problems or washer smells like mildew.

Before Anyone Touches the Washer

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Craig

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Craig

Most washer calls in Craig come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)

In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.

Hiring a Washer Repair Company in Craig

  • What guarantee do you give on parts and labor?
  • Can you give a written estimate before ordering parts?
  • If a part has to be ordered, how soon can you come back to finish?

Washing Machine Repair FAQs: Craig, CO

Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Brand-Specific Washer Repair, Craig

More Washing Machine Repair Pages Nearby

A clear drain filter, open supply valves and the model number in hand make any washer repair in Craig faster and cheaper.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech