If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Rifle list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Rifle CO
Within 60 miles of Rifle there are 18 appliance repair companies in our data. 2 of them are based in Rifle itself, and other nearby bases include Grand Junction (12), Glenwood Springs (1), and Gypsum (1). The farthest listed company is about 57 miles out. Sears Appliance Repair is the nearest, roughly 0.9 miles from Rifle. No company within 90 miles of Rifle mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 17 rated companies, the average public rating is 3.7 stars. Rifle is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Rifle. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 7 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 5 |
| Three nearest companies, miles away | 0.9, 1.1, 23.9 |
| Mention Maytag | 0 |
| Repair companies inside 60 miles | 18 |
| Open on Saturdays (per listing) | 8 |
Closest matches for Rifle: Sears Appliance Repair (0.9 miles away, 1.0 stars from 1 reviews, lists Saturday hours); Nordic Refrigeration (1.1 miles away, 4.8 stars from 18 reviews, lists Saturday hours); The Appliance Doctor (52.9 miles away, based in Grand Junction, 4.4 stars from 122 reviews); Century Appliance, LLC (55.3 miles away, based in Grand Junction, 4.4 stars from 108 reviews).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Rifle
Keeping a Maytag Washer Running
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
Around Rifle
Most washer calls in Rifle come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
How to Choose a Washing Machine Technician Near Rifle
- Can you give a written estimate before ordering parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Rifle, CO
How do I get rid of a washer mildew smell?
Why is my washer leaking?
Why does my Maytag washer show an error code?
Other Washer Repair in Rifle
Maytag Washer Repair Near Rifle
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.