GE owners in Saratoga Springs usually want two things from a repair company: experience with the brand and quick access to parts. The Saratoga Springs list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Independent GE Washer Technicians, Saratoga Springs UT
Within 30 miles of Saratoga Springs there are 40 appliance repair companies in our data. 4 of them are based in Saratoga Springs itself, and the rest are spread across Riverton (7), Lehi (5), and American Fork (5). The farthest listed company is about 13 miles out. No company within 30 miles of Saratoga Springs names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Around Appliance Repair Care is the nearest, roughly 2.1 miles from Saratoga Springs. Across 23 rated companies, the average public rating is 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 7 |
|---|---|
| Three nearest companies, miles away | 2.1, 2.9, 3.4 |
| Appliance repair companies in range (30 mi) | 60 |
| Mention GE | 0 |
| Listing Saturday hours | 42 |
| Mention washer work | 2 |
At the top of the Saratoga Springs list: General Electric Appliance (28.5 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); Vertex Appliance Repair (4.1 miles away, 4.9 stars from 172 reviews); Refrigerate (9.5 miles away, based in Lindon, 4.0 stars from 297 reviews, lists Saturday hours); Rapid Appliance Repair Pleasant Grove (9.3 miles away, based in Pleasant Grove, 5.0 stars from 9 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
What a GE Washer Technician Deals With
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
GE Washer Symptoms and First Checks
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
Signs Your GE Washer Needs a Technician
- An error code on the display
- Loud banging, shaking or walking during the spin
- Water left in the drum after the cycle
How a Washer Service Call Usually Goes in Saratoga Springs
Owner Care for GE Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
What Saratoga Springs Owners Should Know
Most washer calls in Saratoga Springs come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Saratoga Springs
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Can you give a written estimate before ordering parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
GE Washer Repair FAQs: Saratoga Springs, UT
Why does my front-load washer smell?
Why is my washer leaking?
What should I do about a GE error code?
Related Repair Pages for Saratoga Springs
More GE Washer Repair Pages Nearby
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.