Most Electrolux washer repairs in Saratoga Springs involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Saratoga Springs list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Who Works on Electrolux Washers Near Saratoga Springs
40 repair companies serve Saratoga Springs from within 30 miles. 4 list an address in Saratoga Springs, and other nearby bases include Riverton (7), Lehi (5), and American Fork (5). Distances run up to about 13 miles. No company within 90 miles of Saratoga Springs mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Around Appliance Repair Care is the nearest, roughly 2.1 miles from Saratoga Springs. Rated companies nearby average 4.5 stars across 23 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Companies within 30 miles | 60 |
|---|---|
| Three nearest companies, miles away | 2.1, 2.9, 3.4 |
| Mention Electrolux | 0 |
| Open on Saturdays (per listing) | 42 |
| Rated 4.5 stars or higher (10+ reviews) | 7 |
| Mention washer work | 2 |
The leading options for Saratoga Springs are Refrigerate (9.5 miles away, based in Lindon, 4.0 stars from 297 reviews, lists Saturday hours); Vertex Appliance Repair (4.1 miles away, 4.9 stars from 172 reviews); Premier Appliance Repair Draper (10.3 miles away, based in Draper, 5.0 stars from 7 reviews, lists Saturday hours); Rapid Appliance Repair Pleasant Grove (9.3 miles away, based in Pleasant Grove, 5.0 stars from 9 reviews, lists Saturday hours).
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
Common Electrolux Washer Problems
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
Signs Your Electrolux Washer Needs a Technician
- Washer will not start or the lid or door stays locked
- Washer fills slowly, will not fill, or keeps filling
- Washer will not spin, or clothes come out soaking wet
Inside a Washer Repair Visit
Owner Care for Electrolux Washers
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
What Electrolux Washer Repairs Cost
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
Laundry Notes for Saratoga Springs, UT
Most washer calls in Saratoga Springs come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Saratoga Springs
- If the washer is leaking, will you find where the water starts before quoting a part?
- How often do you repair Electrolux washers, and how quickly can you get parts?
- What guarantee do you give on parts and labor?
Electrolux Washer Repair FAQs: Saratoga Springs, UT
Is my Electrolux washer worth repairing?
Where is the water under my washer coming from?
How do I get rid of a washer mildew smell?
Is this Electrolux customer service?
More Washing Machine Repair in Saratoga Springs, UT
More Electrolux Washer Repair Pages Nearby
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Saratoga Springs technician bring the right parts.