Most Electrolux washer repairs in Pleasant Grove involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Who Works on Electrolux Washers Near Pleasant Grove
Our data shows 40 appliance repair companies inside a 30-mile radius of Pleasant Grove. 2 of them are based in Pleasant Grove itself, and other nearby bases include Orem (9), Provo (7), and American Fork (5). The closest is Rapid Appliance Repair Pleasant Grove, about 0.6 miles away. No company within 90 miles of Pleasant Grove mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 27 rated companies, the average public rating is 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 8 |
|---|---|
| Open on Saturdays (per listing) | 43 |
| Repair companies inside 30 miles | 60 |
| Three nearest companies, miles away | 0.6, 0.9, 1.3 |
| Mention Electrolux | 0 |
| Mention washer work | 3 |
First up for Pleasant Grove: Refrigerate (2.6 miles away, based in Lindon, 4.0 stars from 297 reviews, lists Saturday hours); Brothers Masters (6.2 miles away, based in Provo, 5.0 stars from 30 reviews, lists Saturday hours); Rapid Appliance Repair Pleasant Grove (0.6 miles away, 5.0 stars from 9 reviews, lists Saturday hours); Vertex Appliance Repair (10.4 miles away, based in Saratoga Springs, 4.9 stars from 172 reviews).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Symptoms and First Checks
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
When to Call for Electrolux Washer Repair
- Musty or mildew smell from the drum or door seal
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
Inside a Washer Repair Visit
Keeping a Electrolux Washer Running
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Pleasant Grove
Most washer calls in Pleasant Grove come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Pleasant Grove
- Will you check the drain pump filter and drain hose before replacing the pump?
- How often do you repair Electrolux washers, and how quickly can you get parts?
- What guarantee do you give on parts and labor?
Electrolux Washer Repair FAQs: Pleasant Grove, UT
Why is my washer leaking?
Is this Electrolux customer service?
Which Pleasant Grove technicians work on Electrolux?
What stops a washer from spinning?
Other Washer Repair in Pleasant Grove
Electrolux Washer Repair Near Pleasant Grove
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.