Most Electrolux washer repairs in Grantsville involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Grantsville list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Who Works on Electrolux Washers Near Grantsville
We found 40 appliance repair companies within 30 miles of Grantsville. The rest are spread across West Jordan (13), West Valley City (6), and Riverton (6). The closest is Mr. Appliance of Tooele, about 10.7 miles away. No company within 90 miles of Grantsville mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 23 rated companies in range average 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 10.7, 11.1, 20.6 |
|---|---|
| Appliance repair companies in range (30 mi) | 44 |
| Open on Saturdays (per listing) | 26 |
| Mention Electrolux | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 9 |
| Mention washer work | 6 |
The leading options for Grantsville are Quality Appliance Service (28.2 miles away, based in West Valley City, 4.6 stars from 1,441 reviews); Eagle Appliance Repair (28.3 miles away, based in West Jordan, 4.9 stars from 204 reviews, lists Saturday hours); Mr. Appliance of Tooele (10.7 miles away, based in Tooele, 4.8 stars from 352 reviews, lists Saturday hours); Sears Appliance Repair (11.1 miles away, based in Tooele, 4.0 stars from 12 reviews, lists Saturday hours).
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
What Electrolux Says to Check First
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
When to Call for Electrolux Washer Repair
- Grinding or roaring noise that rises with spin speed
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Grantsville
Keeping a Electrolux Washer Running
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Repair Cost Ranges
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Grantsville
Most washer calls in Grantsville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Grantsville
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
- Do you work on front-load and top-load washers, or only one type?
Electrolux Washer Repair FAQs: Grantsville, UT
Which Grantsville technicians work on Electrolux?
How do I get rid of a washer mildew smell?
What should I do about a Electrolux error code?
More Washing Machine Repair in Grantsville, UT
More Electrolux Washer Repair Pages Nearby
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.