Most Whirlpool washer repairs in Grantsville involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Grantsville list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Independent Whirlpool Washer Technicians, Grantsville UT
We found 40 appliance repair companies within 30 miles of Grantsville. The rest are spread across West Jordan (13), West Valley City (6), and Riverton (6). Mr. Appliance of Tooele is the nearest, roughly 10.7 miles from Grantsville. None of the repair companies near Grantsville name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 23 rated companies, the average public rating is 4.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 9 |
|---|---|
| Mention Whirlpool | 0 |
| Name washers or washing machines in their listing | 6 |
| Distance to the three closest (mi) | 10.7, 11.1, 20.6 |
| Listing Saturday hours | 26 |
| Appliance repair companies in range (30 mi) | 44 |
First up for Grantsville: Mr. Appliance of Tooele (10.7 miles away, based in Tooele, 4.8 stars from 352 reviews, lists Saturday hours); Quality Appliance Service (28.2 miles away, based in West Valley City, 4.6 stars from 1,441 reviews); Eagle Appliance Repair (28.3 miles away, based in West Jordan, 4.9 stars from 204 reviews, lists Saturday hours); Latin Appliances LLC - Appliance Repair (20.6 miles away, based in Magna, 4.9 stars from 646 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Whirlpool Washer Lines and Features
What a Whirlpool Washer Technician Deals With
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Whirlpool Washer Symptoms and First Checks
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 | The door or lid lock cannot engage, often because something is blocking the latch area. Source: Whirlpool - Error Codes in Front Load Washers |
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
How a Washer Service Call Usually Goes in Grantsville
Owner Care for Whirlpool Washers
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Grantsville, UT
Most washer calls in Grantsville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Grantsville
- If the washer is leaking, will you find where the water starts before quoting a part?
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
Whirlpool Washer Repair FAQs: Grantsville, UT
Which Grantsville technicians work on Whirlpool?
Where is the water under my washer coming from?
How do I get rid of a washer mildew smell?
Do you work for Whirlpool?
Related Repair Pages for Grantsville
More Whirlpool Washer Repair Pages Nearby
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.