If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Roswell NM
Within 92 miles of Roswell there are 6 appliance repair companies in our data. 3 of them are based in Roswell itself, and the rest are spread across Ruidoso Downs (1), Alamogordo (1), and Hobbs (1). Distances run up to about 92 miles. Sears Appliance Repair is the nearest, roughly 0.5 miles from Roswell. None of the repair companies near Roswell name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 4 rated companies in range average 2.7 stars. Because the nearest shops are farther out, ask each company whether Roswell is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Electrolux | 0 |
|---|---|
| Appliance repair companies in range (92 mi) | 6 |
| Rated 4.5 stars or higher (10+ reviews) | 0 |
| Open on Saturdays (per listing) | 5 |
| Distance to the three closest (mi) | 0.5, 0.7, 1.3 |
| Mention washer work | 3 |
The leading options for Roswell are Sears Appliance Repair (0.5 miles away, 3.0 stars from 2 reviews, lists Saturday hours); Ramirez Appliance Repair./ (0.7 miles away, 3.7 stars from 3 reviews, lists Saturday hours); Appliance Center of Roswell. (1.3 miles away, 1.0 stars from 2 reviews); Sears Appliance Repair (63.2 miles away, based in Ruidoso Downs, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines and Features
How Electrolux Washers Are Built
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
Electrolux Washer Symptoms and First Checks
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
Signs Your Electrolux Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Burning smell or a motor that hums without turning
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Care Electrolux Recommends for Its Washers
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
What Electrolux Washer Repairs Cost
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
What Roswell Owners Should Know
Most washer calls in Roswell come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)
In New Mexico, you can check a license with the NM Regulation and Licensing Department, Construction Industries: Verify a License or report a problem to the New Mexico Department of Justice (Attorney General), Consumer Protection.
Questions to Ask a Roswell Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Can you give a written estimate before ordering parts?
Electrolux Washer Repair FAQs: Roswell, NM
How do I get rid of a washer mildew smell?
Why is my washer leaking?
How do I find a technician who knows Electrolux washers?
Do you work for Electrolux?
More Washing Machine Repair in Roswell, NM
Electrolux Washer Repair Near Roswell
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.