Most Electrolux washer repairs in Santa Fe involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Santa Fe, with those that mention Electrolux first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Santa Fe
Our data shows 20 appliance repair companies inside a 60-mile radius of Santa Fe. Other nearby bases include Albuquerque (12), Edgewood (2), and Ranchos De Taos (2). The farthest listed company is about 54 miles out. None of the repair companies near Santa Fe name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Al's Appliance Center, around 39.1 miles out. The 17 rated companies in range average 4.5 stars. Santa Fe is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (60 mi) | 20 |
|---|---|
| Three nearest companies, miles away | 39.1, 42.8, 43.9 |
| Mention washer work | 7 |
| Listing Saturday hours | 14 |
| With 4.5+ stars and at least 10 reviews | 10 |
| Mention Electrolux | 0 |
First up for Santa Fe: ASAP Appliance Repair (47.7 miles away, based in Albuquerque, 4.9 stars from 657 reviews, lists Saturday hours); Sears Appliance Repair (49.7 miles away, based in Albuquerque, 4.3 stars from 225 reviews, lists Saturday hours); Sarah's Appliance Repair LLC (52.4 miles away, based in Albuquerque, 4.9 stars from 566 reviews, lists Saturday hours); Albuquerque Home Pros (51.5 miles away, based in Albuquerque, 4.7 stars from 48 reviews, lists Saturday hours).
Electrolux Washer Lines and Features
How Electrolux Washers Are Built
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Symptoms and First Checks
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
When to Call for Electrolux Washer Repair
- Water left in the drum after the cycle
- Water on the floor under or in front of the washer
- Washer will not spin, or clothes come out soaking wet
How a Washer Service Call Usually Goes in Santa Fe
Keeping a Electrolux Washer Running
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What Santa Fe Owners Should Know
Most washer calls in Santa Fe come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)
In New Mexico, you can check a license with the NM Regulation and Licensing Department, Construction Industries: Verify a License or report a problem to the New Mexico Department of Justice (Attorney General), Consumer Protection.
How to Choose a Washing Machine Technician Near Santa Fe
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the drain pump filter and drain hose before replacing the pump?
Electrolux Washer Repair FAQs: Santa Fe, NM
Why is my washer leaking?
Why does my front-load washer smell?
What stops a washer from spinning?
Related Repair Pages for Santa Fe
Electrolux Washer Repair Near Santa Fe
Also Serving Towns Around Santa Fe
The technicians listed for Santa Fe also cover smaller towns nearby, including Eldorado at Santa Fe. If you are in one of them, the companies above are your closest Electrolux washer repair options, and our helpline covers you too.
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.