Most Electrolux washer repairs in Lovington involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Lovington list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Who Works on Electrolux Washers Near Lovington
We found 6 appliance repair companies within 77 miles of Lovington. The rest are spread across Roswell (3), Hobbs (1), and Plains (1). Distances run up to about 76 miles. The closest is Sears Appliance Repair, about 16.8 miles away. None of the repair companies near Lovington name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 5 rated companies in range average 3.1 stars. Lovington is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 0 |
|---|---|
| Companies within 77 miles | 6 |
| Mention Electrolux | 0 |
| Name washers or washing machines in their listing | 2 |
| Three nearest companies, miles away | 16.8, 34.2, 41.3 |
| Listing Saturday hours | 4 |
Closest matches for Lovington: Sears Appliance Repair (16.8 miles away, based in Hobbs, lists Saturday hours); David's Appliance Repair (34.2 miles away, based in Plains, 4.8 stars from 4 reviews); Sears Appliance Repair (76.0 miles away, based in Roswell, 3.0 stars from 2 reviews, lists Saturday hours); Fehr's Appliance Repair Center (41.3 miles away, based in Seminole, 3.0 stars from 1 reviews, lists Saturday hours).
Know Your Electrolux Washer
How Electrolux Washers Are Built
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
What Electrolux Says to Check First
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
When to Call for Electrolux Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
Inside a Washer Repair Visit
Keeping a Electrolux Washer Running
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- How old the washer is
Laundry Notes for Lovington, NM
Most washer calls in Lovington come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)
In New Mexico, you can check a license with the NM Regulation and Licensing Department, Construction Industries: Verify a License or report a problem to the New Mexico Department of Justice (Attorney General), Consumer Protection.
Hiring a Washer Repair Company in Lovington
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: Lovington, NM
What stops a washer from spinning?
How do I get rid of a washer mildew smell?
Why does my Electrolux washer show an error code?
Why is my washer leaking?
Other Washer Repair in Lovington
Electrolux Washer Repair Near Lovington
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Lovington technician bring the right parts.