A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Flint, with those that mention Electrolux first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Independent Electrolux Washer Technicians, Flint MI
We found 23 appliance repair companies within 30 miles of Flint. 4 list an address in Flint, and other nearby bases include Waterford Township (3), Burton (2), and Flushing (2). The farthest listed company is about 28 miles out. The closest is Kearsley Appliance Repair, about 1.7 miles away. No company within 90 miles of Flint mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.2 stars across 22 businesses.
Companies are shown by relevance and distance from Flint. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 9 |
|---|---|
| Distance to the three closest (mi) | 1.7, 2.8, 3.3 |
| Rated 4.5 stars or higher (10+ reviews) | 12 |
| Listing Saturday hours | 11 |
| Mention Electrolux | 0 |
| Appliance repair companies in range (30 mi) | 23 |
First up for Flint: Mr. Appliance of Waterford (28.0 miles away, based in Waterford Township, 4.7 stars from 348 reviews); Sears Appliance Repair (4.9 miles away, 4.6 stars from 152 reviews, lists Saturday hours); Michigan Appliance Repair (26.9 miles away, based in Hartland, 4.8 stars from 863 reviews, lists Saturday hours); Sears Appliance Repair (20.2 miles away, based in Lapeer, 4.6 stars from 84 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Know Your Electrolux Washer
How Electrolux Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
Common Electrolux Washer Problems
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
When to Call for Electrolux Washer Repair
- Water left in the drum after the cycle
- Washer will not spin, or clothes come out soaking wet
- Loud banging, shaking or walking during the spin
How a Washer Service Call Usually Goes in Flint
Care Electrolux Recommends for Its Washers
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Flint, MI
Most washer calls in Flint come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Flint
- What is the service call or diagnostic fee, and is it applied to the repair?
- If a part has to be ordered, how soon can you come back to finish?
- Is your company licensed where my state requires it, and insured?
Electrolux Washer Repair FAQs: Flint, MI
Is my Electrolux washer worth repairing?
Where is the water under my washer coming from?
What stops a washer from spinning?
Why does my front-load washer smell?
Related Repair Pages for Flint
Electrolux Washer Repair Near Flint
Also Serving Towns Around Flint
Electrolux washer repair for Beecher, Swartz Creek, and Flushing is handled by the same companies listed for Flint. Each town also has its own washing machine repair page with the nearest companies:
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Flint technician bring the right parts.