If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Grand Rapids, with those that mention Electrolux first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Grand Rapids
38 repair companies serve Grand Rapids from within 30 miles. 8 of them are based in Grand Rapids itself, and other nearby bases include Holland (4), Grandville (3), and Wyoming (2). Distances run up to about 29 miles. Nearest on the list: Cervona Appliance Repair Grand Rapids, around 0.9 miles out. No company within 90 miles of Grand Rapids mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 37 rated companies, the average public rating is 4.5 stars.
Companies are shown by relevance and distance from Grand Rapids. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 0.9, 1.8, 2.3 |
|---|---|
| Mention washer work | 9 |
| Open on Saturdays (per listing) | 18 |
| Repair companies inside 30 miles | 38 |
| Mention Electrolux | 0 |
| With 4.5+ stars and at least 10 reviews | 20 |
The leading options for Grand Rapids are Sears Appliance Repair (4.7 miles away, 4.6 stars from 269 reviews, lists Saturday hours); Bekins (15.7 miles away, based in Coopersville, 4.8 stars from 131 reviews, lists Saturday hours); Sears Appliance Repair (7.5 miles away, based in Grandville, 4.3 stars from 492 reviews, lists Saturday hours); Paul's Appliance Services (9.1 miles away, based in Comstock Park, 4.4 stars from 8 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines Technicians Work On
What Makes Electrolux Washer Repairs Different
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Electrolux Washer Symptoms and First Checks
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
When to Call for Electrolux Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
How a Washer Service Call Usually Goes in Grand Rapids
Care Electrolux Recommends for Its Washers
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
What Electrolux Washer Repairs Cost
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- How old the washer is
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
Local Notes for Grand Rapids
Most washer calls in Grand Rapids come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Questions to Ask a Grand Rapids Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
Electrolux Washer Repair FAQs: Grand Rapids, MI
Why does my front-load washer smell?
Is my Electrolux washer worth repairing?
Which Grand Rapids technicians work on Electrolux?
Do you work for Electrolux?
Related Repair Pages for Grand Rapids
Electrolux Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.