A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Burton list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Electrolux Washers Near Burton
Our data shows 32 appliance repair companies inside a 30-mile radius of Burton. 2 of them are based in Burton itself, and the rest are spread across Waterford Township (6), Flint (4), and Clio (2). Distances run up to about 30 miles. No company within 90 miles of Burton mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Eddie's Fast Appliance Repair is the nearest, roughly 2.0 miles from Burton. Across 31 rated companies, the average public rating is 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (30 mi) | 32 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Name washers or washing machines in their listing | 11 |
| Open on Saturdays (per listing) | 15 |
| Three nearest companies, miles away | 2.0, 2.0, 2.5 |
| Mention Electrolux | 0 |
First up for Burton: Mr. Appliance of Waterford (24.4 miles away, based in Waterford Township, 4.7 stars from 348 reviews); Sears Appliance Repair (7.9 miles away, based in Flint, 4.6 stars from 152 reviews, lists Saturday hours); Michigan Appliance Repair (25.6 miles away, based in Hartland, 4.8 stars from 863 reviews, lists Saturday hours); Sears Appliance Repair (27.9 miles away, based in Waterford Township, 4.7 stars from 125 reviews, lists Saturday hours).
Electrolux Washer Lines Technicians Work On
What a Electrolux Washer Technician Deals With
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
What Electrolux Says to Check First
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
Signs Your Electrolux Washer Needs a Technician
- Burning smell or a motor that hums without turning
- Washer fills slowly, will not fill, or keeps filling
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Owner Care for Electrolux Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Burton, MI
Most washer calls in Burton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Burton
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If a part has to be ordered, how soon can you come back to finish?
Electrolux Washer Repair FAQs: Burton, MI
How do I get rid of a washer mildew smell?
Why is my washer leaking?
How do I find a technician who knows Electrolux washers?
Why won't my washer spin?
Related Repair Pages for Burton
More Electrolux Washer Repair Pages Nearby
Electrolux Washer Repair for Towns Near Burton
The technicians listed for Burton also cover smaller towns nearby, including Grand Blanc and Goodrich. If you are in one of them, the companies above are your closest Electrolux washer repair options, and our helpline covers you too.
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.