A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Sawmills list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Whirlpool Washer Repair Near Sawmills
Within 30 miles of Sawmills there are 12 appliance repair companies in our data. Other nearby bases include Hickory (5), Morganton (2), and Newton (2). The farthest listed company is about 29 miles out. The closest is A1 Appliance Repair Hickory, about 8.3 miles away. None of the repair companies near Sawmills name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 12 rated companies in range average 4.6 stars.
Companies are shown by relevance and distance from Sawmills. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 3 |
|---|---|
| Open on Saturdays (per listing) | 8 |
| Repair companies inside 30 miles | 12 |
| Rated 4.5 stars or higher (10+ reviews) | 4 |
| Mention Whirlpool | 0 |
| Distance to the three closest (mi) | 8.3, 10.9, 11.2 |
At the top of the Sawmills list: A1 Appliance Repair Hickory (8.3 miles away, based in Hickory, 5.0 stars from 29 reviews, lists Saturday hours); Sears Appliance Repair (14.0 miles away, based in Morganton, 4.6 stars from 117 reviews); Sears Appliance Repair (12.4 miles away, based in Hickory, 4.5 stars from 157 reviews, lists Saturday hours); Benfield Appliance Repair, LLC (12.7 miles away, based in Hickory, 4.7 stars from 107 reviews).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Whirlpool Washer Lines Technicians Work On
What a Whirlpool Washer Technician Deals With
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Says to Check First
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Water left in the drum after the cycle
- Washer will not spin, or clothes come out soaking wet
- An error code on the display
How a Washer Service Call Usually Goes in Sawmills
Owner Care for Whirlpool Washers
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Sawmills Owners Should Know
Most washer calls in Sawmills come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Hiring a Washer Repair Company in Sawmills
- How often do you repair Whirlpool washers, and how quickly can you get parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
- Do you work on front-load and top-load washers, or only one type?
Whirlpool Washer Repair FAQs: Sawmills, NC
Why does my front-load washer smell?
Which Sawmills technicians work on Whirlpool?
Is this Whirlpool customer service?
Other Washer Repair in Sawmills
More Whirlpool Washer Repair Pages Nearby
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.