Serving Sawmills, North Carolina and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Sawmills, NC

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Sawmills.

Talk to a washing machine tech near Sawmills
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Sawmills✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Sawmills, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. This page lists independent appliance repair companies serving Sawmills and the Caldwell County area, with companies that mention washer work shown first.

Local Washing Machine Repair in Sawmills, NC

We found 12 appliance repair companies within 30 miles of Sawmills. Other nearby bases include Hickory (5), Morganton (2), and Newton (2). The farthest listed company is about 29 miles out. 3 of them mention washing machine or washer work in their listing or website. The closest is A1 Appliance Repair Hickory, about 8.3 miles away. Rated companies nearby average 4.6 stars across 12 businesses.

Washer & Dryer Repair
Sears Appliance Repair
1940 US Hwy 70 SE, Hickory, NC 28602
12.4 mi from Sawmills
★★★★½ 4.5 (157 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
A1 Appliance Repair Hickory
2046 1st Ave SW Suite 2, Hickory, NC 28602
8.3 mi from Sawmills
★★★★★ 5.0 (29 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
110 112 Bost Rd, Morganton, NC 28655
14.0 mi from Sawmills
★★★★½ 4.6 (117 reviews)
Mentions washers
Appliance Repair
Benfield Appliance Repair, LLC
1244 Shirebourn, Hickory, NC 28602
12.7 mi from Sawmills
★★★★½ 4.7 (107 reviews)
Appliance Repair
Richard's Appliance Repair
4912 South NC 127 Highway, Hickory, NC 28602
10.9 mi from Sawmills
★★★★★ 5.0 (8 reviews)
Appliance Repair
Rinks Appliances
1913 Plaza Dr, Hickory, NC 28602
11.2 mi from Sawmills
★★★★½ 4.4 (107 reviews)
Saturday hours
Appliance Repair
Local Appliance Repair Newton
912 N Main Ave, Newton, NC 28658
17.5 mi from Sawmills
★★★★★ 5.0 (1 review)
Saturday hours
Appliance Repair
Bob Young's Appliances
3477 US-421, Wilkesboro, NC 28697
27.1 mi from Sawmills
★★★★½ 4.4 (140 reviews)
Saturday hours
Appliance Repair
All Systems Pro
1028 Loblolly Lane, Newton, NC 28658
16.2 mi from Sawmills
★★★★½ 4.3 (62 reviews)
Saturday hours
Appliance Repair
Patton's Major Appliance Repair
2490 NC-181, Morganton, NC 28655
15.8 mi from Sawmills
★★★½ 3.3 (16 reviews)
Appliance Repair
Norwood's Commercial Appliances, Inc
151 H O Aldridge Rd, Boone, NC 28607
28.7 mi from Sawmills
★★★★★ 5.0 (2 reviews)
CommercialSaturday hours
Appliance Repair
Honest Stanley Appliance Repair
2678 E Main St, Lincolnton, NC 28092
27.7 mi from Sawmills
★★★★★ 5.0 (1 review)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Repair market snapshot: Sawmills, NC
Three nearest companies, miles away8.3, 10.9, 11.2
With 4.5+ stars and at least 10 reviews4
Appliance repair companies in range (30 mi)12
Mention a major washer brand0
Name washers or washing machines in their listing3
Open on Saturdays (per listing)8

First up for Sawmills: Sears Appliance Repair (12.4 miles away, based in Hickory, 4.5 stars from 157 reviews, lists Saturday hours); A1 Appliance Repair Hickory (8.3 miles away, based in Hickory, 5.0 stars from 29 reviews, lists Saturday hours); Sears Appliance Repair (14.0 miles away, based in Morganton, 4.6 stars from 117 reviews); Benfield Appliance Repair, LLC (12.7 miles away, based in Hickory, 4.7 stars from 107 reviews).

⚡ Get connected with a washer technician near Sawmills
☎(866) 293-4411

When to Call for Washer Repair

  • Burning smell or a motor that hums without turning
  • Water on the floor under or in front of the washer
  • Musty or mildew smell from the drum or door seal
  • Water left in the drum after the cycle

Why Washing Machines Break Down

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

What Gets Fixed on a Sawmills Washer Call

Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.

Troubleshooting first? Start with front-load vs top-load washer problems or washer smells like mildew.

Before Anyone Touches the Washer

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Do not let children play in, on or with a washer, and remove the lid or door before a washer is discarded or taken out of service so a child cannot become trapped inside. Source: GE Appliances - Washer Owner's Manual

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Sawmills

Most washer calls in Sawmills come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

Hiring a Washer Repair Company in Sawmills

  • What guarantee do you give on parts and labor?
  • Do you work on front-load and top-load washers, or only one type?
  • How often do you repair your brand washers, and how quickly can you get parts?

Washing Machine Repair FAQs: Sawmills, NC

How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.

Washer Repair by Brand in Sawmills

More Washing Machine Repair Pages Nearby

Before you call a Sawmills technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech