If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Taylorsville list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Whirlpool Washers Near Taylorsville
Within 30 miles of Taylorsville there are 17 appliance repair companies in our data. Other nearby bases include Hickory (5), Mooresville (5), and Newton (2). Nearest on the list: Bob Young's Appliances, around 16.2 miles out. None of the repair companies near Taylorsville name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.6 stars across 17 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Companies within 30 miles | 17 |
|---|---|
| Mention Whirlpool | 0 |
| Listing Saturday hours | 12 |
| Mention washer work | 6 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Three nearest companies, miles away | 16.2, 16.4, 17.2 |
First up for Taylorsville: Sears Appliance Repair (19.8 miles away, based in Statesville, 4.4 stars from 195 reviews, lists Saturday hours); LKN Appliance Repair Statesville (18.4 miles away, based in Statesville, 4.9 stars from 12 reviews, lists Saturday hours); A1 Appliance Repair Hickory (17.2 miles away, based in Hickory, 5.0 stars from 29 reviews, lists Saturday hours); Quick Reliable Appliance Repair of Mooresville, NC (27.3 miles away, based in Mooresville, 4.7 stars from 92 reviews, lists Saturday hours).
Know which Whirlpool washer you have before you call. Whirlpool makes top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial models, and the technician will ask.
Whirlpool Washer Lines Technicians Work On
What a Whirlpool Washer Technician Deals With
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Says to Check First
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
What Gets Fixed on a Taylorsville Washer Call
Owner Care for Whirlpool Washers
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
What Taylorsville Owners Should Know
Most washer calls in Taylorsville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Hiring a Washer Repair Company in Taylorsville
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
Whirlpool Washer Repair FAQs: Taylorsville, NC
How do I find a technician who knows Whirlpool washers?
Why won't my washer spin?
Why does my front-load washer smell?
More Washing Machine Repair in Taylorsville, NC
More Whirlpool Washer Repair Pages Nearby
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.