A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Whirlpool Washer Repair Near Graham
Within 30 miles of Graham there are 40 appliance repair companies in our data. 1 of them are based in Graham itself, and the rest are spread across Greensboro (15), Durham (11), and Burlington (5). Nearest on the list: Vercom, around 1.7 miles out. No company within 90 miles of Graham mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 35 rated companies in range average 4.4 stars.
Companies are shown by relevance and distance from Graham. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 7 |
|---|---|
| Listing Saturday hours | 22 |
| Three nearest companies, miles away | 1.7, 2.4, 3.2 |
| Repair companies inside 30 miles | 40 |
| Mention Whirlpool | 0 |
| With 4.5+ stars and at least 10 reviews | 17 |
First up for Graham: AMC Appliance Repair- Durham, North Carolina (22.9 miles away, based in Durham, 5.0 stars from 139 reviews, lists Saturday hours); Sears Appliance Repair (5.6 miles away, based in Burlington, 4.4 stars from 186 reviews, lists Saturday hours); Edward's Appliance Service (17.5 miles away, based in Gibsonville, 4.8 stars from 24 reviews); Sears Appliance Repair (24.9 miles away, based in Greensboro, 4.4 stars from 955 reviews, lists Saturday hours).
Know which Whirlpool washer you have before you call. Whirlpool makes top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial models, and the technician will ask.
Whirlpool Washer Lines and Features
What Makes Whirlpool Washer Repairs Different
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
- Loud banging, shaking or walking during the spin
What Gets Fixed on a Graham Washer Call
Owner Care for Whirlpool Washers
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Graham Owners Should Know
Most washer calls in Graham come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Before You Book in Graham
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
- If the washer is leaking, will you find where the water starts before quoting a part?
Whirlpool Washer Repair FAQs: Graham, NC
How do I find a technician who knows Whirlpool washers?
Why does my front-load washer smell?
Is this Whirlpool customer service?
What stops a washer from spinning?
Related Repair Pages for Graham
More Whirlpool Washer Repair Pages Nearby
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Graham technician bring the right parts.