Most Amana washer repairs in Graham involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Graham, with those that mention Amana first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana washers and other brands.
Independent Amana Washer Technicians, Graham NC
We found 40 appliance repair companies within 30 miles of Graham. 1 list an address in Graham, and the rest are spread across Greensboro (15), Durham (11), and Burlington (5). Nearest on the list: Vercom, around 1.7 miles out. None of the repair companies near Graham name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 35 rated companies in range average 4.4 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 17 |
|---|---|
| Companies within 30 miles | 40 |
| Three nearest companies, miles away | 1.7, 2.4, 3.2 |
| Mention washer work | 7 |
| Mention Amana | 0 |
| Open on Saturdays (per listing) | 22 |
First up for Graham: AMC Appliance Repair- Durham, North Carolina (22.9 miles away, based in Durham, 5.0 stars from 139 reviews, lists Saturday hours); Sears Appliance Repair (5.6 miles away, based in Burlington, 4.4 stars from 186 reviews, lists Saturday hours); Porterfield's Appliance Repair (13.9 miles away, based in Burlington, 4.6 stars from 30 reviews, lists Saturday hours); Edward's Appliance Service (17.5 miles away, based in Gibsonville, 4.8 stars from 24 reviews).
Amana Washer Lines Technicians Work On
What Makes Amana Washer Repairs Different
Amana front loaders with a user-cleanable pump filter are serviced from the front: a short drain hose is emptied into a container, then the filter is unscrewed counterclockwise, and the location varies by model. Source: Amana - Cleaning the Pump Filter - Front Load Washer
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
- Lid won't lock or unlock. Amana says to clear anything caught under the lid and any detergent buildup around the lock, and to take items such as a laundry basket off the top of the washer. Source: Amana - Error Codes in Top Load HE Washers
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| F9 E1 | Front load: draining is taking longer than expected, so check the drain hose and standpipe. Source: Amana - Error Codes in Front Load Washers |
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
| LdL | Top load: the lid can't lock, often because of an item under the lid or detergent buildup at the lock. Source: Amana - Error Codes in Top Load HE Washers |
Amana Washer Problems Worth a Service Call
- An error code on the display
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Graham Washer Call
Care Amana Recommends for Its Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- Run the Clean Washer cycle with a washer cleaning tablet about once a month to clear detergent and softener residue. Source: Amana - HE Detergent use in a Washer
Amana Washer Repair Cost Ranges
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Amana Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Graham, NC
Most washer calls in Graham come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Hiring a Washer Repair Company in Graham
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If a part has to be ordered, how soon can you come back to finish?
Amana Washer Repair FAQs: Graham, NC
Why won't my washer spin?
Is my Amana washer worth repairing?
Is this Amana customer service?
Other Washer Repair in Graham
More Amana Washer Repair Pages Nearby
Write down any error code your Amana washer shows and at what point in the cycle it appears. It helps a Graham technician bring the right parts.