A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Gibsonville list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Independent Whirlpool Washer Technicians, Gibsonville NC
Our data shows 40 appliance repair companies inside a 30-mile radius of Gibsonville. 2 of them are based in Gibsonville itself, and other nearby bases include Greensboro (15), High Point (10), and Burlington (5). The farthest listed company is about 30 miles out. No company within 90 miles of Gibsonville mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Sears Appliance Repair, around 3.4 miles out. Across 29 rated companies, the average public rating is 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Whirlpool | 0 |
|---|---|
| Three nearest companies, miles away | 3.4, 4.1, 5.7 |
| Open on Saturdays (per listing) | 26 |
| Mention washer work | 5 |
| Companies within 30 miles | 41 |
| With 4.5+ stars and at least 10 reviews | 12 |
The leading options for Gibsonville are Sears Appliance Repair (3.4 miles away, based in Burlington, 4.4 stars from 186 reviews, lists Saturday hours); Edward's Appliance Service (11.9 miles away, 4.8 stars from 24 reviews); Sears Appliance Repair (16.3 miles away, based in Greensboro, 4.4 stars from 955 reviews, lists Saturday hours); John Michael & Associates, Inc. (26.1 miles away, based in High Point, 4.7 stars from 230 reviews).
Whirlpool Washer Lines and Features
What Makes Whirlpool Washer Repairs Different
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
What Whirlpool Says to Check First
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- An error code on the display
- Washer fills slowly, will not fill, or keeps filling
What Gets Fixed on a Gibsonville Washer Call
Care Whirlpool Recommends for Its Washers
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Around Gibsonville
Most washer calls in Gibsonville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Hiring a Washer Repair Company in Gibsonville
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
- Do you work on front-load and top-load washers, or only one type?
Whirlpool Washer Repair FAQs: Gibsonville, NC
Why does my Whirlpool washer show an error code?
Should I repair or replace my Whirlpool washer?
How do I find a technician who knows Whirlpool washers?
Other Washer Repair in Gibsonville
Whirlpool Washer Repair Near Gibsonville
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.