Whirlpool owners in Richmond usually want two things from a repair company: experience with the brand and quick access to parts. The Richmond list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Independent Whirlpool Washer Technicians, Richmond KY
Within 30 miles of Richmond there are 22 appliance repair companies in our data. 2 of them are based in Richmond itself, and the rest are spread across Lexington (9), Danville (5), and Winchester (3). Nearest on the list: Sears Home Services, around 0.7 miles out. No company within 90 miles of Richmond mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.1 stars across 22 businesses.
Companies are shown by relevance and distance from Richmond. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 0.7, 4.3, 6.1 |
|---|---|
| Repair companies inside 30 miles | 22 |
| Open on Saturdays (per listing) | 13 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Mention Whirlpool | 0 |
| Name washers or washing machines in their listing | 9 |
At the top of the Richmond list: EJ's Appliance Repair (19.0 miles away, based in Winchester, 4.8 stars from 617 reviews); Mr. Appliance of Lexington KY (23.5 miles away, based in Lexington, 4.9 stars from 2,215 reviews); Sears Home Services (0.7 miles away, 4.5 stars from 68 reviews, lists Saturday hours); Sears Appliance Repair (22.2 miles away, based in Lexington, 4.3 stars from 170 reviews, lists Saturday hours).
Know Your Whirlpool Washer
What a Whirlpool Washer Technician Deals With
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Says to Check First
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 | The door or lid lock cannot engage, often because something is blocking the latch area. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Washer will not spin, or clothes come out soaking wet
- Washer fills slowly, will not fill, or keeps filling
Inside a Washer Repair Visit
Keeping a Whirlpool Washer Running
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- Any error code shown on the display
Local Notes for Richmond
Most washer calls in Richmond come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Kentucky has no license category for appliance repair as such; the Department of Housing, Buildings and Construction licenses trades such as HVAC (whose scope covers installing and repairing heating, burner and cooling systems), plumbing and electrical. Source: KRS 198B.650 Definitions (Kentucky Legislative Research Commission)
In Kentucky, you can check a license with the Department of Housing, Buildings and Construction License Search and Verification or report a problem to the Kentucky Attorney General, Office of Consumer Protection.
How to Choose a Washing Machine Technician Near Richmond
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Can you give a written estimate before ordering parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
Whirlpool Washer Repair FAQs: Richmond, KY
What should I do about a Whirlpool error code?
Why does my front-load washer smell?
Which Richmond technicians work on Whirlpool?
Why won't my washer spin?
Related Repair Pages for Richmond
Whirlpool Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.