Serving Brookings, South Dakota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Brookings, SD

Washing machine repair from independent technicians serving Brookings, with ratings, distances and what to check before you call.

Talk to a washing machine tech near Brookings
Tell us the brand and the problem and we will connect you with a technician near Brookings.
☎(866) 293-4411
✓12 companies listed for Brookings✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. This page lists independent appliance repair companies serving Brookings and the Brookings County area, with companies that mention washer work shown first.

Local Washing Machine Repair in Brookings, SD

We found 17 appliance repair companies within 60 miles of Brookings. 1 of them are based in Brookings itself, and the rest are spread across Sioux Falls (11), Watertown (3), and Estelline (1). Distances run up to about 55 miles. Of those, 5 mention washing machine or washer work by name. The closest is Mr. Appliance of Brookings, about 2.1 miles away. Across 16 rated companies, the average public rating is 4.7 stars. Because the nearest shops are farther out, ask each company whether Brookings is inside its regular service area.

Washer & Dryer Repair
Mr. Appliance of Brookings
2626 Sweetgrass Dr, Brookings, SD 57006
2.1 mi from Brookings
★★★★★ 4.9 (196 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Sioux Falls
3710 S Westport Ave Ste A, Sioux Falls, SD 57106
54.6 mi from Brookings
★★★★★ 4.8 (668 reviews)
Mentions washers
Washer & Dryer Repair
Mr. Appliance
101 9th Ave SW, Watertown, SD 57201
43.8 mi from Brookings
★★★★★ 4.9 (129 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Midtek Appliance Repair
707 E 41st St Ste 210, Sioux Falls, SD 57105
54.5 mi from Brookings
★★★★★ 4.8 (589 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
1101 Jenson Ave S, Watertown, SD 57201
43.4 mi from Brookings
★★★★★ 4.8 (17 reviews)
Mentions washersSaturday hours
Appliance Repair
The Appliance Doc. LLC
2500 S Glendale Ave, Sioux Falls, SD 57105
53.9 mi from Brookings
★★★★★ 4.9 (317 reviews)
Appliance Repair
Landegent's Appliance Service of Sioux Falls
3309 E 28th St #9, Sioux Falls, SD 57103
53.8 mi from Brookings
★★★★★ 4.9 (91 reviews)
Appliance Repair
Spin Cycle Discount Appliance & Repair
1309 N Lowell Ave, Sioux Falls, SD 57103
51.4 mi from Brookings
★★★★★ 4.9 (71 reviews)
Saturday hours
Appliance Repair
Neighborhood Appliance Repair
603 Davis Ave E, Estelline, SD 57234
19.8 mi from Brookings
★★★★★ 5.0 (1 review)
Saturday hours
Appliance Repair
Kuiper Appliance Service LLC
1316 4th Ave SE, Watertown, SD 57201
43.4 mi from Brookings
★★★★★ 4.8 (47 reviews)
Appliance Repair
Jer's Commercial Appliance & Refrigeration Repair
3700 S Marion Rd, Sioux Falls, SD 57106
54.6 mi from Brookings
★★★★½ 4.4 (25 reviews)
CommercialSaturday hours
Appliance Repair
Russ's Appliance Repair
411 W Main St, Marshall, MN 56258
50.1 mi from Brookings
★★★★½ 4.3 (13 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Repair market snapshot: Brookings, SD
Mention a major washer brand0
Rated 4.5 stars or higher (10+ reviews)9
Open on Saturdays (per listing)10
Distance to the three closest (mi)2.1, 19.8, 43.4
Repair companies inside 60 miles17
Mention washer work5

First up for Brookings: Mr. Appliance of Brookings (2.1 miles away, 4.9 stars from 196 reviews, lists Saturday hours); Mr. Appliance of Sioux Falls (54.6 miles away, based in Sioux Falls, 4.8 stars from 668 reviews); Mr. Appliance (43.8 miles away, based in Watertown, 4.9 stars from 129 reviews, lists Saturday hours); Midtek Appliance Repair (54.5 miles away, based in Sioux Falls, 4.8 stars from 589 reviews).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Loud banging, shaking or walking during the spin
  • Musty or mildew smell from the drum or door seal
  • Water left in the drum after the cycle
  • Washer fills slowly, will not fill, or keeps filling

Why Washing Machines Break Down

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

How a Washer Service Call Usually Goes in Brookings

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with front-load vs top-load washer problems or washer smells like mildew.

If Your Washer Is Leaking

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

Before replacing a washer in Brookings, price the repair. Here is what published cost guides report for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Brookings

Most washer calls in Brookings come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

The South Dakota Plumbing Commission issues Appliance Contractor and Appliance Installer licenses as plumbing specialty licenses; official pages reviewed did not spell out which appliance work they cover or whether repair alone requires one. Source: South Dakota Plumbing Commission - Licensing

In South Dakota, you can check a license with the South Dakota Plumbing Commission lists of licensees (specialty licensees, including appliance) or report a problem to the South Dakota Attorney General, Division of Consumer Protection.

Before You Book in Brookings

  • How often do you repair your brand washers, and how quickly can you get parts?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Will you check the drain pump filter and drain hose before replacing the pump?

Washing Machine Repair FAQs: Brookings, SD

Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.

Find Your Washer Brand in Brookings

Washing Machine Repair Near Brookings

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Brookings technician a trip for parts.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech