Serving Huron, South Dakota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Huron, SD

A local list of washer repair companies near Huron, SD, sorted by how closely they match the work, then by distance and public ratings.

Talk to a washing machine tech near Huron
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓6 companies listed for Huron✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Huron, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. The Huron list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Who Repairs Washers Near Huron

We found 6 appliance repair companies within 66 miles of Huron. The rest are spread across Watertown (3), Mitchell (2), and Corsica (1). 3 list washing machine or washer work specifically. The closest is Karl's TV, Audio & Appliance Mitchell, about 45.2 miles away. Rated companies nearby average 4.7 stars across 6 businesses. Huron is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Mr. Appliance
101 9th Ave SW, Watertown, SD 57201
64.9 mi from Huron
★★★★★ 4.9 (129 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1101 Jenson Ave S, Watertown, SD 57201
65.6 mi from Huron
★★★★★ 4.8 (17 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1601 S Ohlman St, Mitchell, SD 57301
46.8 mi from Huron
★★★★½ 4.5 (2 reviews)
Mentions washersSaturday hours
Appliance Repair
Karl's TV, Audio & Appliance Mitchell
1301 N Main St, Mitchell, SD 57301
45.2 mi from Huron
★★★★ 4.0 (32 reviews)
Saturday hours
Appliance Repair
Kuiper Appliance Service LLC
1316 4th Ave SE, Watertown, SD 57201
65.9 mi from Huron
★★★★★ 4.8 (47 reviews)
Appliance Repair
Appliance Center
260 E Main St, Corsica, SD 57328
65.6 mi from Huron
★★★★★ 5.0 (3 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Repair market snapshot: Huron, SD
Name washers or washing machines in their listing3
Companies within 66 miles6
Open on Saturdays (per listing)4
Rated 4.5 stars or higher (10+ reviews)3
Mention a major washer brand0
Three nearest companies, miles away45.2, 46.8, 64.9

At the top of the Huron list: Mr. Appliance (64.9 miles away, based in Watertown, 4.9 stars from 129 reviews, lists Saturday hours); Sears Appliance Repair (65.6 miles away, based in Watertown, 4.8 stars from 17 reviews, lists Saturday hours); Sears Appliance Repair (46.8 miles away, based in Mitchell, 4.5 stars from 2 reviews, lists Saturday hours); Karl's TV, Audio & Appliance Mitchell (45.2 miles away, based in Mitchell, 4.0 stars from 32 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Musty or mildew smell from the drum or door seal
  • An error code on the display
  • Washer fills slowly, will not fill, or keeps filling
  • Burning smell or a motor that hums without turning

What Usually Goes Wrong

Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

How a Washer Service Call Usually Goes in Huron

Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not filling with water.

Leaks and Safe Shutoff

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Huron

Most washer calls in Huron come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

The South Dakota Plumbing Commission issues Appliance Contractor and Appliance Installer licenses as plumbing specialty licenses; official pages reviewed did not spell out which appliance work they cover or whether repair alone requires one. Source: South Dakota Plumbing Commission - Licensing

In South Dakota, you can check a license with the South Dakota Plumbing Commission lists of licensees (specialty licensees, including appliance) or report a problem to the South Dakota Attorney General, Division of Consumer Protection.

Before You Book in Huron

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • Will you check the drain pump filter and drain hose before replacing the pump?
  • How often do you repair your brand washers, and how quickly can you get parts?

Washing Machine Repair FAQs: Huron, SD

Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Which areas near Huron do these technicians cover?
The companies on this page are within driving distance of Huron. Each one sets its own service area, so check the distance shown and confirm your address when you call.

Washer Repair by Brand in Huron

Washing Machine Repair in Nearby Cities

A clear drain filter, open supply valves and the model number in hand make any washer repair in Huron faster and cheaper.

Get connected with a washer technician near Huron
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech