Serving Glenpool, Oklahoma and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Glenpool, OK

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Glenpool.

Washer down in Glenpool?
Tell us the brand and the problem and we will connect you with a technician near Glenpool.
☎(866) 293-4411
✓12 companies listed for Glenpool✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. Below are the companies within reach of Glenpool, sorted by how closely they match washing machine work, then by distance and public ratings.

Local Washing Machine Repair in Glenpool, OK

Within 30 miles of Glenpool there are 35 appliance repair companies in our data. 1 of them are based in Glenpool itself, and other nearby bases include Tulsa (18), Owasso (4), and Broken Arrow (3). Distances run up to about 28 miles. Of those, 12 mention washing machine or washer work by name. Herrin Appliance is the nearest, roughly 0.7 miles from Glenpool. Across 31 rated companies, the average public rating is 4.4 stars.

Washer & Dryer Repair
Mr. Appliance of Metro Tulsa
8230 E 41st St, Tulsa, OK 74145
12.8 mi from Glenpool
★★★★★ 4.8 (1,114 reviews)
Mentions washers
Washer & Dryer Repair
CJ Appliance Repair Tulsa
8014 S 101st E Ave, Tulsa, OK 74133
10.5 mi from Glenpool
★★★★★ 4.9 (666 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
3804 S Elm Pl, Broken Arrow, OK 74011
12.4 mi from Glenpool
★★★★½ 4.6 (185 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
6929 S Memorial Dr, Tulsa, OK 74133
10.4 mi from Glenpool
★★★★½ 4.6 (332 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Brothers Appliance Service llc
S 145th E Ave, Broken Arrow, OK 74012
13.1 mi from Glenpool
★★★★½ 4.4 (69 reviews)
Mentions washers
Washer & Dryer Repair
Fast Eddie's Appliance Repair
1319 N Allegheny Ave, Tulsa, OK 74115
16.3 mi from Glenpool
★★★★½ 4.5 (35 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
SK Laundry Equipment Company
14111 E 59th St N, Owasso, OK 74055
22.7 mi from Glenpool
★★★★★ 5.0 (2 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
1601 S Wood Dr, Okmulgee, OK 74447
23.7 mi from Glenpool
★★★★½ 4.5 (53 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Pro Service II
27649 E 101st St S, Coweta, OK 74429
19.4 mi from Glenpool
★★★★½ 4.3 (12 reviews)
Mentions washers
Washer & Dryer Repair
Appliance Pro Service
7318 S Darlington Ave, Tulsa, OK 74136
8.9 mi from Glenpool
★★★★★ 5.0 (6 reviews)
Mentions washers
Washer & Dryer Repair
Shelton's Quality Services
7437 E 46th Pl, Tulsa, OK 74145
12.0 mi from Glenpool
★★★ 2.9 (144 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
MAC Service Network
18 W 41st St, Sand Springs, OK 74063
12.5 mi from Glenpool
Mentions washersSaturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Repair market snapshot: Glenpool, OK
Name washers or washing machines in their listing12
Companies within 30 miles35
Mention a major washer brand0
Listing Saturday hours18
With 4.5+ stars and at least 10 reviews14
Three nearest companies, miles away0.7, 6.5, 8.7

The leading options for Glenpool are Mr. Appliance of Metro Tulsa (12.8 miles away, based in Tulsa, 4.8 stars from 1,114 reviews); CJ Appliance Repair Tulsa (10.5 miles away, based in Tulsa, 4.9 stars from 666 reviews); Sears Appliance Repair (12.4 miles away, based in Broken Arrow, 4.6 stars from 185 reviews, lists Saturday hours); Sears Appliance Repair (10.4 miles away, based in Tulsa, 4.6 stars from 332 reviews, lists Saturday hours).

⚡ Skip the calling around: we will find a washer tech for you
☎(866) 293-4411

When to Call for Washer Repair

  • Loud banging, shaking or walking during the spin
  • An error code on the display
  • Washer will not start or the lid or door stays locked
  • Water left in the drum after the cycle

What Usually Goes Wrong

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.

What Gets Fixed on a Glenpool Washer Call

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.

Troubleshooting first? Start with washer not filling with water or washer smells like mildew.

Water, Power and Safety First

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Glenpool

Before replacing a washer in Glenpool, price the repair. Here is what published cost guides report for common jobs:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Glenpool Owners Should Know

Most washer calls in Glenpool come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)

In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.

Before You Book in Glenpool

  • Will you check the drain pump filter and drain hose before replacing the pump?
  • Is your company licensed where my state requires it, and insured?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Washing Machine Repair FAQs: Glenpool, OK

Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Brand-Specific Washer Repair, Glenpool

More Washing Machine Repair Pages Nearby

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Glenpool technician a trip for parts.

Get connected with a washer technician near Glenpool
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech