Most Maytag washer repairs in Glenpool involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Glenpool list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Glenpool
We found 35 appliance repair companies within 30 miles of Glenpool. 1 of them are based in Glenpool itself, and other nearby bases include Tulsa (18), Owasso (4), and Broken Arrow (3). The farthest listed company is about 28 miles out. None of the repair companies near Glenpool name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Herrin Appliance, about 0.7 miles away. Across 31 rated companies, the average public rating is 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 0.7, 6.5, 8.7 |
|---|---|
| Open on Saturdays (per listing) | 18 |
| Appliance repair companies in range (30 mi) | 35 |
| With 4.5+ stars and at least 10 reviews | 14 |
| Mention washer work | 12 |
| Mention Maytag | 0 |
First up for Glenpool: Mr. Appliance of Metro Tulsa (12.8 miles away, based in Tulsa, 4.8 stars from 1,114 reviews); Sears Appliance Repair (12.4 miles away, based in Broken Arrow, 4.6 stars from 185 reviews, lists Saturday hours); CJ Appliance Repair Tulsa (10.5 miles away, based in Tulsa, 4.9 stars from 666 reviews); Sears Appliance Repair (10.4 miles away, based in Tulsa, 4.6 stars from 332 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
Common Maytag Washer Problems
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
When to Call for Maytag Washer Repair
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
- Loud banging, shaking or walking during the spin
What a Washing Machine Technician Checks
Care Maytag Recommends for Its Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Glenpool, OK
Most washer calls in Glenpool come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.
How to Choose a Washing Machine Technician Near Glenpool
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Glenpool, OK
Why does my Maytag washer show an error code?
Where is the water under my washer coming from?
Is this Maytag customer service?
Related Repair Pages for Glenpool
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.