If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Glenpool list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Glenpool OK
We found 35 appliance repair companies within 30 miles of Glenpool. 1 of them are based in Glenpool itself, and other nearby bases include Tulsa (18), Owasso (4), and Broken Arrow (3). None of the repair companies near Glenpool name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Herrin Appliance is the nearest, roughly 0.7 miles from Glenpool. Across 31 rated companies, the average public rating is 4.4 stars.
Companies are shown by relevance and distance from Glenpool. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Listing Saturday hours | 18 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Mention Electrolux | 0 |
| Distance to the three closest (mi) | 0.7, 6.5, 8.7 |
| Name washers or washing machines in their listing | 12 |
| Appliance repair companies in range (30 mi) | 35 |
At the top of the Glenpool list: CJ Appliance Repair Tulsa (10.5 miles away, based in Tulsa, 4.9 stars from 666 reviews); Mr. Appliance of Metro Tulsa (12.8 miles away, based in Tulsa, 4.8 stars from 1,114 reviews); Sears Appliance Repair (10.4 miles away, based in Tulsa, 4.6 stars from 332 reviews, lists Saturday hours); Appliance Pro Service (8.9 miles away, based in Tulsa, 5.0 stars from 6 reviews).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Know Your Electrolux Washer
What a Electrolux Washer Technician Deals With
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Symptoms and First Checks
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
When to Call for Electrolux Washer Repair
- Water left in the drum after the cycle
- Water on the floor under or in front of the washer
- Washer fills slowly, will not fill, or keeps filling
How a Washer Service Call Usually Goes in Glenpool
Owner Care for Electrolux Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Budgeting for a Electrolux Washer Repair
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
Around Glenpool
Most washer calls in Glenpool come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.
Hiring a Washer Repair Company in Glenpool
- Is your company licensed where my state requires it, and insured?
- Do you work on front-load and top-load washers, or only one type?
- If the washer is leaking, will you find where the water starts before quoting a part?
Electrolux Washer Repair FAQs: Glenpool, OK
Which Glenpool technicians work on Electrolux?
Where is the water under my washer coming from?
Why does my Electrolux washer show an error code?
Related Repair Pages for Glenpool
More Electrolux Washer Repair Pages Nearby
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Glenpool technician bring the right parts.