If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Midwest City list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Who Works on Electrolux Washers Near Midwest City
Our data shows 30 appliance repair companies inside a 30-mile radius of Midwest City. 2 of them are based in Midwest City itself, and other nearby bases include Oklahoma City (12), Norman (4), and Edmond (3). Distances run up to about 27 miles. The closest is Sears Appliance Repair, about 2.2 miles away. No company within 90 miles of Midwest City mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 27 rated companies in range average 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 13 |
|---|---|
| Name washers or washing machines in their listing | 11 |
| Mention Electrolux | 0 |
| Companies within 30 miles | 30 |
| Open on Saturdays (per listing) | 17 |
| Distance to the three closest (mi) | 2.2, 2.4, 2.8 |
First up for Midwest City: Adam's Appliance Repair, Inc (15.0 miles away, based in Norman, 5.0 stars from 462 reviews, lists Saturday hours); All Pro Appliance Repair Service (15.8 miles away, based in Edmond, 4.9 stars from 1,254 reviews); Adam's Appliance Repair, Inc (15.6 miles away, based in Oklahoma City, 4.9 stars from 1,147 reviews, lists Saturday hours); All Pro Appliance Repair Service Oklahoma City (9.7 miles away, based in Oklahoma City, 4.9 stars from 617 reviews).
Electrolux Washer Lines Technicians Work On
What a Electrolux Washer Technician Deals With
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
What Electrolux Says to Check First
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
Electrolux Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Water left in the drum after the cycle
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Owner Care for Electrolux Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Around Midwest City
Most washer calls in Midwest City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.
Questions to Ask a Midwest City Washer Technician
- Will you check the drain pump filter and drain hose before replacing the pump?
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: Midwest City, OK
Is this Electrolux customer service?
Should I repair or replace my Electrolux washer?
Which Midwest City technicians work on Electrolux?
Related Repair Pages for Midwest City
Electrolux Washer Repair Near Midwest City
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Midwest City technician bring the right parts.