Serving Edmond, Oklahoma and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Edmond, OK

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Edmond.

Water sitting in the washer in Edmond?
Tell us the brand and the problem and we will connect you with a technician near Edmond.
☎(866) 293-4411
✓12 companies listed for Edmond✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Edmond, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. The Edmond list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washer Technicians Serving Edmond, OK

Within 30 miles of Edmond there are 24 appliance repair companies in our data. 3 of them are based in Edmond itself, and the rest are spread across Oklahoma City (12), Midwest City (2), and Norman (2). Distances run up to about 29 miles. 8 list washing machine or washer work specifically. The closest is N2 Appliances, about 3.5 miles away. The 22 rated companies in range average 4.3 stars.

Washer & Dryer Repair
All Pro Appliance Repair Service
2236 NW 164th St Suite #2, Edmond, OK 73013
8.0 mi from Edmond
★★★★★ 4.9 (1,254 reviews)
Mentions washers
Washer & Dryer Repair
All Pro Appliance Repair Service Oklahoma City
317 NW 60th St Ste d, Oklahoma City, OK 73118
11.0 mi from Edmond
★★★★★ 4.9 (617 reviews)
Mentions washers
Washer & Dryer Repair
Adam's Appliance Repair, Inc
7712 NW 3rd St Ste D, Oklahoma City, OK 73127
19.0 mi from Edmond
★★★★★ 4.9 (1,147 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Oklahoma City
230 W Wilshire Blvd Suite 4G, Oklahoma City, OK 73116
10.0 mi from Edmond
★★★★½ 4.7 (1,102 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Yukon, Stillwater, and Edmond
13100 Colony Pointe Blvd Ste 107, Piedmont, OK 73078
18.8 mi from Edmond
★★★★★ 4.9 (884 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Adam's Appliance Repair, Inc
3557 National Dr # C, Norman, OK 73069
28.3 mi from Edmond
★★★★★ 5.0 (462 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
4400 S Western Ave, Oklahoma City, OK 73109
18.1 mi from Edmond
★★★★ 4.2 (323 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
6909 E Reno Ave, Midwest City, OK 73110
14.0 mi from Edmond
★★★★½ 4.5 (146 reviews)
Mentions washersSaturday hours
Appliance Repair
AlphaTek Appliance Repair
3030 Northwest Expy Ste 200 #534, Oklahoma City, OK 73112
13.1 mi from Edmond
★★★★★ 4.9 (1,440 reviews)
Saturday hours
Appliance Repair
Near Appliance Repair
3030 Northwest Expy Ste 200 #633, Oklahoma City, OK 73112
13.1 mi from Edmond
★★★★★ 4.8 (90 reviews)
Saturday hours
Appliance Repair
Zander Appliance Services, LLC
4209 Steven Dr, Edmond, OK 73013
4.0 mi from Edmond
★★★★★ 4.9 (55 reviews)
Saturday hours
Appliance Repair
Batteries Plus Phone Repair
7201 SE 29th St #202, Midwest City, OK 73110
16.1 mi from Edmond
★★★★½ 4.4 (103 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Washer repair near Edmond at a glance
Mention washer work8
Appliance repair companies in range (30 mi)24
Mention a major washer brand0
Listing Saturday hours14
Rated 4.5 stars or higher (10+ reviews)12
Distance to the three closest (mi)3.5, 4.0, 8.0

The leading options for Edmond are All Pro Appliance Repair Service (8.0 miles away, 4.9 stars from 1,254 reviews); All Pro Appliance Repair Service Oklahoma City (11.0 miles away, based in Oklahoma City, 4.9 stars from 617 reviews); Adam's Appliance Repair, Inc (19.0 miles away, based in Oklahoma City, 4.9 stars from 1,147 reviews, lists Saturday hours); Mr. Appliance of Oklahoma City (10.0 miles away, based in Oklahoma City, 4.7 stars from 1,102 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

When to Call for Washer Repair

  • Musty or mildew smell from the drum or door seal
  • An error code on the display
  • Water on the floor under or in front of the washer
  • Water left in the drum after the cycle

What Usually Goes Wrong

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

What Gets Fixed on a Edmond Washer Call

Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.

Troubleshooting first? Start with washer not spinning or front-load vs top-load washer problems.

Water, Power and Safety First

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

Set the washer on a solid floor with no more than about 1 inch of slope under the cabinet, adjust the leveling feet, and tighten the locknuts against the cabinet; loose locknuts can cause vibration. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Edmond Owners Should Know

Most washer calls in Edmond come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)

In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.

Questions to Ask a Edmond Washer Technician

  • Will you check the drain pump filter and drain hose before replacing the pump?
  • How often do you repair your brand washers, and how quickly can you get parts?
  • If a part has to be ordered, how soon can you come back to finish?

Washing Machine Repair FAQs: Edmond, OK

Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Find Your Washer Brand in Edmond

Washing Machine Repair in Nearby Cities

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Edmond technician a trip for parts.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech