Serving Grand Forks, North Dakota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Grand Forks, ND

See which appliance repair companies around Grand Forks work on washing machines, how far away they are and how customers rate them.

Water sitting in the washer in Grand Forks?
Tell us the brand and the problem and we will connect you with a technician near Grand Forks.
☎(866) 293-4411
✓5 companies listed for Grand Forks✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. This page lists independent appliance repair companies serving Grand Forks and the Grand Forks County area, with companies that mention washer work shown first.

Local Washing Machine Repair in Grand Forks, ND

Our data shows 5 appliance repair companies inside a 60-mile radius of Grand Forks. 3 list an address in Grand Forks, and other nearby bases include Thief River Falls (2). The closest is Bud & Ralph's Appliance Service, about 0.9 miles away. Of those, 3 mention washing machine or washer work by name. Across 5 rated companies, the average public rating is 3.2 stars. Grand Forks is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
1900 S Washington St, Grand Forks, ND 58201
2.3 mi from Grand Forks
★★★½ 3.4 (5 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2800 S Columbia Rd, Grand Forks, ND 58201
2.1 mi from Grand Forks
★★★½ 3.4 (5 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1547 US-59, Thief River Falls, MN 56701
45.1 mi from Grand Forks
★ 1.0 (1 review)
Mentions washersSaturday hours
Appliance Repair
Bud & Ralph's Appliance Service
1555 N 42nd St A, Grand Forks, ND 58203
0.9 mi from Grand Forks
★★★★½ 4.6 (223 reviews)
Appliance Repair
Rick's Appliance.
1029 6th St W, Thief River Falls, MN 56701
43.5 mi from Grand Forks
★★★½ 3.6 (8 reviews)
Saturday hours

Companies are shown by relevance and distance from Grand Forks. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: Grand Forks, ND
Open on Saturdays (per listing)4
Mention a major washer brand0
With 4.5+ stars and at least 10 reviews1
Companies within 60 miles5
Mention washer work3
Three nearest companies, miles away0.9, 2.1, 2.3

At the top of the Grand Forks list: Sears Appliance Repair (2.3 miles away, 3.4 stars from 5 reviews, lists Saturday hours); Sears Appliance Repair (2.1 miles away, 3.4 stars from 5 reviews, lists Saturday hours); Sears Appliance Repair (45.1 miles away, based in Thief River Falls, 1.0 stars from 1 reviews, lists Saturday hours); Bud & Ralph's Appliance Service (0.9 miles away, 4.6 stars from 223 reviews).

⚡ Get connected with a washer technician near Grand Forks
☎(866) 293-4411

When to Call for Washer Repair

  • Washer will not start or the lid or door stays locked
  • Washer fills slowly, will not fill, or keeps filling
  • Water left in the drum after the cycle
  • Grinding or roaring noise that rises with spin speed

The Usual Washer Culprits in Grand Forks

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

What Gets Fixed on a Grand Forks Washer Call

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.

Troubleshooting first? Start with washer not filling with water or washer not spinning.

Before Anyone Touches the Washer

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Avoid installing a washer on carpet or loose plywood, and keep leveling legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

Before replacing a washer in Grand Forks, price the repair. Here is what published cost guides report for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Grand Forks, ND

Most washer calls in Grand Forks come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

In North Dakota, you can check a license with the North Dakota Secretary of State FirstStop contractor search or report a problem to the North Dakota Attorney General, Consumer Protection Division.

Questions to Ask a Grand Forks Washer Technician

  • What guarantee do you give on parts and labor?
  • Do you work on front-load and top-load washers, or only one type?
  • How often do you repair your brand washers, and how quickly can you get parts?

Washing Machine Repair FAQs: Grand Forks, ND

What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Do you cover Grand Forks and nearby towns?
The companies on this page are within driving distance of Grand Forks. Each one sets its own service area, so check the distance shown and confirm your address when you call.

Find Your Washer Brand in Grand Forks

Washing Machine Repair in Nearby Cities

Before you call a Grand Forks technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech