If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Grand Forks list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Who Works on Maytag Washers Near Grand Forks
Our data shows 5 appliance repair companies inside a 60-mile radius of Grand Forks. 3 of them are based in Grand Forks itself, and the rest are spread across Thief River Falls (2). Distances run up to about 45 miles. Bud & Ralph's Appliance Service is the nearest, roughly 0.9 miles from Grand Forks. No company within 90 miles of Grand Forks mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 3.2 stars across 5 businesses. Because the nearest shops are farther out, ask each company whether Grand Forks is inside its regular service area.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 4 |
|---|---|
| Three nearest companies, miles away | 0.9, 2.1, 2.3 |
| Companies within 60 miles | 5 |
| Mention washer work | 3 |
| With 4.5+ stars and at least 10 reviews | 1 |
| Mention Maytag | 0 |
The leading options for Grand Forks are Bud & Ralph's Appliance Service (0.9 miles away, 4.6 stars from 223 reviews); Sears Appliance Repair (2.3 miles away, 3.4 stars from 5 reviews, lists Saturday hours); Sears Appliance Repair (2.1 miles away, 3.4 stars from 5 reviews, lists Saturday hours); Sears Appliance Repair (45.1 miles away, based in Thief River Falls, 1.0 stars from 1 reviews, lists Saturday hours).
Know Your Maytag Washer
What Makes Maytag Washer Repairs Different
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Maytag Washer Symptoms and First Checks
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
- Grinding or roaring noise that rises with spin speed
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Around Grand Forks
Most washer calls in Grand Forks come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In North Dakota, you can check a license with the North Dakota Secretary of State FirstStop contractor search or report a problem to the North Dakota Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Grand Forks
- Do you work on front-load and top-load washers, or only one type?
- Will you check the drain pump filter and drain hose before replacing the pump?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Grand Forks, ND
Is my Maytag washer worth repairing?
Do you work for Maytag?
Which Grand Forks technicians work on Maytag?
Related Repair Pages for Grand Forks
Maytag Washer Repair Near Grand Forks
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Grand Forks technician bring the right parts.