Serving Valley City, North Dakota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Valley City, ND

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Valley City.

Water sitting in the washer in Valley City?
Tell us the brand and the problem and we will connect you with a technician near Valley City.
☎(866) 293-4411
✓7 companies listed for Valley City✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. Below are the companies within reach of Valley City, sorted by how closely they match washing machine work, then by distance and public ratings.

Local Washing Machine Repair in Valley City, ND

We found 7 appliance repair companies within 60 miles of Valley City. Other nearby bases include Fargo (5), Jamestown (1), and Moorhead (1). The farthest listed company is about 58 miles out. Nearest on the list: Ty's Appliance Repair, around 33.8 miles out. The 7 rated companies in range average 4.3 stars. Because the nearest shops are farther out, ask each company whether Valley City is inside its regular service area.

Appliance Repair
Pete’s Appliance Repair LLC
1531 32nd Ave S #102, Fargo, ND 58103
55.7 mi from Valley City
★★★★★ 4.9 (237 reviews)
Appliance Repair
The Appliance Guy FM
4303 S Rivershore Dr, Moorhead, MN 56560
58.2 mi from Valley City
★★★★★ 5.0 (38 reviews)
Saturday hours
Appliance Repair
Ty's Appliance Repair
814 14th St SW, Jamestown, ND 58401
33.8 mi from Valley City
★★★★★ 5.0 (12 reviews)
Saturday hours
Appliance Repair
Appliance Pros
3120 25th St S, Fargo, ND 58103
56.4 mi from Valley City
★★★★★ 4.8 (127 reviews)
Appliance Repair
Dacotah Tech Appliance
1621 5th St N, Fargo, ND 58102
57.6 mi from Valley City
★★★★½ 4.7 (29 reviews)
Appliance Repair
Fargo Appliance Repair Technologies
24 8th St N, Fargo, ND 58102
57.3 mi from Valley City
★★★★★ 5.0 (1 review)
Saturday hours
Appliance Repair
Reliable Appliance Repair
1809 43rd St N, Fargo, ND 58102
54.3 mi from Valley City
★ 1.0 (2 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Valley City
Name washers or washing machines in their listing0
Three nearest companies, miles away33.8, 54.3, 55.7
Listing Saturday hours3
Mention a major washer brand0
Rated 4.5 stars or higher (10+ reviews)5
Appliance repair companies in range (60 mi)7

The leading options for Valley City are Pete’s Appliance Repair LLC (55.7 miles away, based in Fargo, 4.9 stars from 237 reviews); The Appliance Guy FM (58.2 miles away, based in Moorhead, 5.0 stars from 38 reviews, lists Saturday hours); Ty's Appliance Repair (33.8 miles away, based in Jamestown, 5.0 stars from 12 reviews, lists Saturday hours); Appliance Pros (56.4 miles away, based in Fargo, 4.8 stars from 127 reviews).

⚡ Skip the calling around: we will find a washer tech for you
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Water on the floor under or in front of the washer
  • Grinding or roaring noise that rises with spin speed
  • Washer will not spin, or clothes come out soaking wet
  • Loud banging, shaking or walking during the spin

Why Washing Machines Break Down

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

How a Washer Service Call Usually Goes in Valley City

Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.
Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.

Troubleshooting first? Start with front-load vs top-load washer problems or washer smells like mildew.

Water, Power and Safety First

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

Set the washer on a solid floor with no more than about 1 inch of slope under the cabinet, adjust the leveling feet, and tighten the locknuts against the cabinet; loose locknuts can cause vibration. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Before replacing a washer in Valley City, price the repair. Here is what published cost guides report for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Valley City

Most washer calls in Valley City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

In North Dakota, you can check a license with the North Dakota Secretary of State FirstStop contractor search or report a problem to the North Dakota Attorney General, Consumer Protection Division.

How to Choose a Washing Machine Technician Near Valley City

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Is your company licensed where my state requires it, and insured?

Washing Machine Repair FAQs: Valley City, ND

How much does washing machine repair cost in Valley City?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Which areas near Valley City do these technicians cover?
The companies on this page are within driving distance of Valley City. Each one sets its own service area, so check the distance shown and confirm your address when you call.

Find Your Washer Brand in Valley City

More Washing Machine Repair Pages Nearby

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Valley City technician a trip for parts.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech