Serving Jamestown, North Dakota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Jamestown, ND

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Jamestown.

Need washer repair in Jamestown?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓6 companies listed for Jamestown✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Jamestown, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. Below are the companies within reach of Jamestown, sorted by how closely they match washing machine work, then by distance and public ratings.

Washing Machine Repair Companies Near Jamestown

6 repair companies serve Jamestown from within 89 miles. 1 list an address in Jamestown, and other nearby bases include Fargo (3) and Devils Lake (2). Distances run up to about 89 miles. The 5 rated companies in range average 4.0 stars. Nearest on the list: Ty's Appliance Repair, around 1.5 miles out. Jamestown is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Appliance Repair
Ty's Appliance Repair
814 14th St SW, Jamestown, ND 58401
1.5 mi from Jamestown
★★★★★ 5.0 (12 reviews)
Saturday hours
Appliance Repair
Pete’s Appliance Repair LLC
1531 32nd Ave S #102, Fargo, ND 58103
88.1 mi from Jamestown
★★★★★ 4.9 (237 reviews)
Appliance Repair
Karl's TV & Appliance Devils Lake
346 US-2, Devils Lake, ND 58301
83.3 mi from Jamestown
★★★★½ 4.4 (30 reviews)
Saturday hours
Appliance Repair
Appliance Pros
3120 25th St S, Fargo, ND 58103
88.7 mi from Jamestown
★★★★★ 4.8 (127 reviews)
Appliance Repair
Brad's Appliance Repair
201 4th St SE, Devils Lake, ND 58301
83.3 mi from Jamestown
Saturday hours
Appliance Repair
Reliable Appliance Repair
1809 43rd St N, Fargo, ND 58102
86.8 mi from Jamestown
★ 1.0 (2 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Jamestown repair companies in numbers
Mention a major washer brand0
Distance to the three closest (mi)1.5, 83.3, 83.3
Rated 4.5 stars or higher (10+ reviews)3
Name washers or washing machines in their listing0
Companies within 89 miles6
Listing Saturday hours3

First up for Jamestown: Ty's Appliance Repair (1.5 miles away, 5.0 stars from 12 reviews, lists Saturday hours); Pete’s Appliance Repair LLC (88.1 miles away, based in Fargo, 4.9 stars from 237 reviews); Karl's TV & Appliance Devils Lake (83.3 miles away, based in Devils Lake, 4.4 stars from 30 reviews, lists Saturday hours); Appliance Pros (88.7 miles away, based in Fargo, 4.8 stars from 127 reviews).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

When to Call for Washer Repair

  • Loud banging, shaking or walking during the spin
  • Washer fills slowly, will not fill, or keeps filling
  • Water on the floor under or in front of the washer
  • Burning smell or a motor that hums without turning

Why Washing Machines Break Down

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

How a Washer Service Call Usually Goes in Jamestown

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with washer not draining or washer not spinning.

Water, Power and Safety First

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Jamestown

Most washer calls in Jamestown come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

In North Dakota, you can check a license with the North Dakota Secretary of State FirstStop contractor search or report a problem to the North Dakota Attorney General, Consumer Protection Division.

Hiring a Washer Repair Company in Jamestown

  • If a part has to be ordered, how soon can you come back to finish?
  • What guarantee do you give on parts and labor?
  • Can you give a written estimate before ordering parts?

Washing Machine Repair FAQs: Jamestown, ND

Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.

Washer Repair by Brand in Jamestown

Washing Machine Repair Near Jamestown

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Jamestown technician a trip for parts.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech